Jump to content

Close but No Cigar

grsnovi
 Share

Recommended Posts

grsnovi Distinguished Member

grsnovi

Posted
Posted

In parallel with fiddling with actual old watch movements, I've been working through Mark's online watch repair course. To date I've worked through 21 lessons covering 97 topics. Although I "technically" passed my Level 3 course with a 76% score on the assessment (where the average is only a 78%) I didn't do well enough to receive a certificate as I did with Levels 1 and 2.

Luckily there's no time limit on access to the courseware so I plan to work through the 5 movements I have on hand and re-do the Level 3 FAULT FINDING course again. Truth be told, I knew once I got started that fault finding was going to be more difficult than either Level 1 or 2 and I was actually surprised that I got 76% on the assessment. I was also encouraged that the average grade was only a 78% which means that while I didn't do great - nobody else did either.

So, I guess the "achievement" here is that I'm only just beginning this journey and (possibly) that you can teach an old dog new tricks?

  • Like 3
oldhippy Distinguished Member

oldhippy

Posted
Posted

I don't know how long you have been working on Mark's courses. When I started my apprenticeship back in the early 70's it took me 5 years of learning then another 2 what they called improving so 7 years and even now being on this wonderful interesting forum I'm still learning I read something new nearly every day. grsnovi, you will never learn everything there is to know in horology. Keep at it just improving your skills will make you a better watchmaker. 

  • Like 3
anilv Distinguished Member

anilv

Posted
Posted

Practice makes perfect.  I usually tell folks if you have problems assembling flatpack (IKEA) furniture then don't bother with watches. If you can dismantle/service/assemble stuff like car carburetors/brakes/engines then you're good to go.

Anilv

 

  • Like 1
RichardHarris123 Distinguished Member

RichardHarris123

Posted
Posted
1 hour ago, oldhippy said:

I don't know how long you have been working on Mark's courses. When I started my apprenticeship back in the early 70's it took me 5 years of learning then another 2 what they called improving so 7 years and even now being on this wonderful interesting forum I'm still learning I read something new nearly every day. grsnovi, you will never learn everything there is to know in horology. Keep at it just improving your skills will make you a better watchmaker. 

A subject doesn't exist were someone knows everything.  They is always something to learn on any topic. 

  • Like 1
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted
7 minutes ago, oldhippy said:

I no nothing about cars and I don't buy flat backed furniture. 

That might be that therory out of the window then. Haha. But I'm thinking that OH you have good taste in furniture and that you prefer to ride a pushbike .lol

3 minutes ago, RichardHarris123 said:

A subject doesn't exist were someone knows everything.  They is always something to learn on any topic. 

Mostly yes i totally  agree with that. Unless your name is Godfrey as mine is. You can call me God for short . 😄

12 hours ago, grsnovi said:

In parallel with fiddling with actual old watch movements, I've been working through Mark's online watch repair course. To date I've worked through 21 lessons covering 97 topics. Although I "technically" passed my Level 3 course with a 76% score on the assessment (where the average is only a 78%) I didn't do well enough to receive a certificate as I did with Levels 1 and 2.

Luckily there's no time limit on access to the courseware so I plan to work through the 5 movements I have on hand and re-do the Level 3 FAULT FINDING course again. Truth be told, I knew once I got started that fault finding was going to be more difficult than either Level 1 or 2 and I was actually surprised that I got 76% on the assessment. I was also encouraged that the average grade was only a 78% which means that while I didn't do great - nobody else did either.

So, I guess the "achievement" here is that I'm only just beginning this journey and (possibly) that you can teach an old dog new tricks?

Yes G absolutely not possibly  you can. We should be realistic to a point to avoid disappointment.  But never underestimate what you can do. 👍

  • Like 1
Paul80 WRT Addict

Paul80

Posted
Posted

Congratulations as well, but boy you went through the three courses fast !!!.

Hope you weren't on a mission just to complete as fast as possible rather than learn 😉

grsnovi Distinguished Member

grsnovi

Posted
  • Author
Posted
3 hours ago, Paul80 said:

Hope you weren't on a mission

No mission Paul. The first one was mostly things that I had absorbed while watching 3 dozen or so YT videos and was rather easy. I had started that mid-March while working on the first Elgin. I went through the material for Level 2 in April and wanted to do the fault finding one since all of the movements that I have to work on are non-runners (other than the Seagull ST36 that I purchased to work on for Level 2).

I think I learn better while doing.

rossjackson01 Super WRT Addict

rossjackson01

Posted
Posted

grsnovi

Well done!

 

Like you I'm doing Marks course. As a complete novice I tried the Youtube watch and learn. However Mark's Course gives direction. Level 1 achievement was 90%. I'm mid-way though level 2. Never realised how much I did not know, and did wrong with regard to cleaning. 

The forum is great help.

Really enjoying the training. 

Regards to all.

Ross

  • Thanks 1
grsnovi Distinguished Member

grsnovi

Posted
  • Author
Posted

My next "project" will be the Buren 410 "Grand Prix". I've already cleaned it (although I wasn't able to completely disassemble it). Thanks for watching my progress 🙂

 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      What's your thoughts on this Rolex Sea-Dweller, ref. 16600, calibre 3135 project?

      By VWatchie · Posted

      Well, my fundamental stance is that I want to go in and out without leaving any trace other than a shining, perfectly running movement. So, no scratchings on the inside of the case back lid, no marred screws, no debris, no fingerprints, and so on. That is, my goal is to make it impossible for the FBI to track me down. As a professional, I suppose you might want to keep track of returning watches, but as @JohnR725 mentioned, we can keep detailed computer records without marking the watch at all. That may not be true for every watch, but luxury and COSC-certified movements do have unique numbers. John also says it’s best to leave no sign you were ever there, and I couldn't agree more. Now, suppose the Sea-Dweller I'm working on is one day scrapped, and you want to sell the case-back separately (perhaps the case was destroyed in a plane crash). Then the scribbles on the inside no longer reflect the current movement inside the case. Also, the engraving will likely halve the market value of the case back. It had been "sleeping" for about a week and a half. Yes, the "debris/old lubricant" theory is my hypothesis as well! It will be interesting to see what I find once I have time to start disassembling the movement.
    • MikeEll
      Help with repairing a quartz clock

      By MikeEll · Posted

      I've repaired a few of these, having some success with stripping and cleaning the mechanism.  They are so cheap though, its hardly worth the effort in many cases.
    • watchweasol
      Oldhippy

      By watchweasol · Posted

      Get well soon Old Hippy, torn muscles.,  not good
    • SwissSeiko
      A lathe with indexing that won't break the bank?

      By SwissSeiko · Posted

      Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • Poljot
      Broken watch stem in watch crown

      By Poljot · Posted

      If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
×
×
  • Create New...