Jump to content

Stem

RichardHarris123
 Share

Recommended Posts

RichardHarris123 Distinguished Member

RichardHarris123

Posted
Posted (edited)

Hello, thanks for all the help so far, it's been invaluable. 

I need a stem for an Omega cal. 40.6L. I have attached the bidfun page. Looked up the Flume number but to no avail. 

Any idea what will fit? 

Regards 

Richard 

Screenshot_20220406-131841_Chrome.jpg

Screenshot_20220406-132438_Chrome.jpg

Edited by RichardHarris123
Wrong photo
Link to comment
Share on other sites
mikepilk Distinguished Member

mikepilk

Posted
Posted (edited)

Enter 40.6 in the search box, and select the magnifying glass icon on the right of it 

Then tick the 40.6 selection button, and then "Search for Items" 

(I didn't invent the above pic, it does exist !)

image.png.8605bd42d146d60edb404ba83cd2bed2.png.

Edited by mikepilk
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      I'm guessing, but this commercial demag machine maybe produces random magnetic fields to re-randomise  the iron particles. So heres one for you, synthetic rubies are coloured predominantly with chromium oxide . But natural rubies and old synthetic watch rubies were also coloured with iron oxide in higher percentages than chromium oxide. Which gave them a degree of.................🤔
    • Jon
      Chinese clone demagnetizers

      By Jon · Posted

      I've never had a hairspring distort on me by passing the movement or just the balance in a plastic pot over this demagnetiser. Have you seen how fast a cleaning machine spins to spin-off fluid and that does no harm to a hairspring. I was a little concerned when I first used it, thinking it might be too strong, but I was wrong. It is strong, but it does no damage. I pass the part over the demagnetiser and keep going for about an arms length, so about a metre, to properly demag the part.
    • HectorLooi
      Seiko kinetic generator coil

      By HectorLooi · Posted

      I don't think you would be able to find spare parts. Your best bet would be to get a new movement from eBay. https://www.ebay.com/itm/256508500506?itmmeta=01HY3M863PSA61GK7B859QCWTE&hash=item3bb9191a1a:g:ubgAAOSwrJJgPP-s&itmprp=enc%3AAQAJAAAA4DxWhpiQiz2ZjKpm3PS%2FHPh4IafsSzMWEobc2q4qQWgPGMZ8kCR8y2PRsm7GE31FjeSDYSWcEyGlrpZEdQyyzOSgsgsaPjbP7dYmK8r49Nh%2BEtSqDDIZ8Tbp3vvX035fFXgcjc1GEH8l%2FOWJ9aTeWNGzeBgUwqyhJ3ZSXji50TQr6rd38Sqwaqsj2oc51UVKqqIKySKTfxVB7X09EXcJsmeYc5GCdVODNkb02q2RsxfSIzpgl9dFCmW1Ih%2BPg2j2NziSELg5AfaHl%2FPU2Zn9fNnoVN1Z1NUAREyh2BCubcWC|tkp%3ABk9SR_bhoPTwYw
    • Michael1962
      Vertex Dirty Dozen crystal

      By Michael1962 · Posted

      Here's a thought. Try unscrewing the bezel and the crystal. If you have one of those sticky balls for undoing casebacks, I would give that a try.
    • ManSkirtBrew
      Citizen Eco-Drive E870 movement issues

      By ManSkirtBrew · Posted

      Last week I noticed my Eco-drive's second hand was stopped at 12 o'clock. I left it in the sun for a few days and no change, so I figured it was time to replace the rechargeable battery. I've had this guy for at least 15 years. Replaced the battery and the seconds hand moved to about 5 o'clock and stopped there. I let it sit for a day in the sun, no change. I took the battery out and tested it, and it's at 1.4v. The old one was at 1.0v. I'd like to test if it's charging. I've been looking around for diagnostic info, but only been able to find the owner's manual. Anyone have a reference for it?
×
×
  • Create New...