Jump to content

Practice

FrankMachin
 Share

Recommended Posts

FrankMachin Member

FrankMachin

Posted
Posted (edited)

hi all

What's best to practice on?  old broken non working watches people are selling dirt cheap in places like marketplace or something else?

 

cheers

Edited by FrankMachin
jdrichard Distinguished Member

jdrichard

Posted
Posted
54 minutes ago, FrankMachin said:

hi all

What's best to practice on?  old broken non working watches people are selling dirt cheap in places like marketplace or something else?

 

cheers

Buy old working watches off eBay or ETSY. They usually come in batches and are cheap. Then use these to disassemble and reassemble. You can wind them with a screwdriver over the mainspring ratchet wheel. That way you will know if your reassembly worked. Take your time.

  • Like 1
  • Thanks 1
kibbler Member

kibbler

Posted
Posted

It's best to start with a movement that is functioning, so you know once you have it back together whether you have assembled it correctly.

Mark's watch repair course uses a chinese ETA 6497/6498 clone, I believe

  • Like 1
  • Thanks 1
oldhippy Distinguished Member

oldhippy

Posted
Posted

I always advise someone who is just starting, start on a pocket watch movement (not the fusee type) The movements are the same as as a basic watch, you don't need to bother getting it to work, it gives you good practice on how to hold tweezers, watchmakers screw drivers and using your eye glass.  

  • Like 1
  • Thanks 1
kibbler Member

kibbler

Posted
Posted
59 minutes ago, FrankMachin said:

Three diffferent pieces of advice.. you guys trying to confuse me? 🤣

I guess it depends where you are in your journey, are you just trying to get some experience dealing with small watch parts, or are you trying to practice correct reassembly?

Trying to get a non-working movement to actually work again should come after, either way.

  • Thanks 1
HectorLooi Distinguished Member

HectorLooi

Posted
Posted

They are all good advice. If you are totally new to watch repair, working on any watch will give you practice. Basic skills like tweezering, picking up small parts, flipping them over, rotating it in your hands and not dropping them or squeezing so hard that they ping away. Learning how to use screwdrivers without slipping and creating scratches. Learning to shape, dress and maintain your tools.

Learning how to disassemble a watch. Learning how to clean by hand. Working with springy things. How to handle mainsprings and hairsprings. 

All the above skills can only be mastered by hours of practice. So start somewhere. Anywhere.

As for the advice on getting a working watch is for a beginner to know the proper functioning of a watch. I've seen many non-working watches on eBay with unusual damage that was probably caused by a careless watchmaker. 

When you successfully take apart a watch, clean, oil and reassemble it, there is no better satisfaction than seeing the balance beating away.

  • Like 1
  • Thanks 1
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Cihan
      Experience and Maintenance of Citizen Leopard 36000 Watch

      By Cihan · Posted

      I have acquired a Citizen Leopard 36000 watch. My reason for purchasing it was my desire to own a timepiece with a 36,000 BPH movement, and the price was reasonable. Another motivating factor was gaining hands-on experience with the mechanism. The watch is in good condition, but I intend to fully disassemble it for maintenance. First and foremost, if anyone has prior experience with this particular model, I would greatly appreciate their insights. I do not have access to Citizen’s specialized lubricants and will need to use the ones available to me, such as 9010, 8000, and 8300 grease. Additionally, I do not possess the appropriate oil for the pallet jewels and will only be able to clean them.
    • t1climb1
      Stuck on current Valjoux Chronograph repair

      By t1climb1 · Posted

      Hello all, I am working on an older Valjoux Chrono. It doesn't have a stamp on the movement anywhere but I believe it is a Valjoux 72. I installed the train of wheels and they will not turn. The problem appears to be the 4th wheel and the escape wheel are not interfacing correctly. I had to replace both of these parts as the pivots were broken on each. I sourced genuine Valjoux/ETA replacements. I think the problem is with the escape wheel as all the wheels turn perfectly if I remove just the escape wheel.  My question to those with more Valjoux experience is am I mistaken? Is this some other model altogether and I have the wrong part or parts?    
    • RichardHarris123
      Help with repairing a quartz clock

      By RichardHarris123 · Posted

      I would remove the wheels, check for damage and if not damaged, clean. 
    • MikaR
      Help with repairing a quartz clock

      By MikaR · Posted

      Thanks for the replies! Here's a photo of the front of the clock and a GIF animation of the movement (exposed by removing the black cap in the centre of the clock). You can see the behaviour of the gears. It's a fairly valuable clock from the 80s (Braun ABW 35). I'm not sure if replacing the movement would diminish the value, so I'd prefer to keep the original parts if it's easy to fix. But since the movement itself is pretty generic, I guess, maybe replacing it wouldn't make any difference with regard to the value of the clock? Or would it? I suppose the value is mostly in the design.
    • VWatchie
      What's your thoughts on this Rolex Sea-Dweller, ref. 16600, calibre 3135 project?

      By VWatchie · Posted

      Well, my fundamental stance is that I want to go in and out without leaving any trace other than a shining, perfectly running movement. So, no scratchings on the inside of the case back lid, no marred screws, no debris, no fingerprints, and so on. That is, my goal is to make it impossible for the FBI to track me down. As a professional, I suppose you might want to keep track of returning watches, but as @JohnR725 mentioned, we can keep detailed computer records without marking the watch at all. That may not be true for every watch, but luxury and COSC-certified movements do have unique numbers. John also says it’s best to leave no sign you were ever there, and I couldn't agree more. Now, suppose the Sea-Dweller I'm working on is one day scrapped, and you want to sell the case-back separately (perhaps the case was destroyed in a plane crash). Then the scribbles on the inside no longer reflect the current movement inside the case. Also, the engraving will likely halve the market value of the case back. It had been "sleeping" for about a week and a half. Yes, the "debris/old lubricant" theory is my hypothesis as well! It will be interesting to see what I find once I have time to start disassembling the movement.
×
×
  • Create New...