Wave Ceptor--recalled to life

[LittleWatchShop]

I got this watch years ago.  Some time after that it quit working.  Then I tossed it into the watch bench that ways dormant.  Sat there for years.

After I learned about accelerating hands using my demag, I decided to try spinning the hands on this watch.  Yay...they spun.  So, I installed a battery went through the setup procedure and set the time.  Now it is working fine.  Receives WWV and calibrates itself.

Now I need to get a band for it.  I do not know what I did with the one that was on it.

[Nucejoe]

Do you have a link to the setup procedure? 

 I bought a German made junghans in Europe , its battery died, it runs good with a new battery but don't know how to set the time on it and no satelite broadcasts in my region of the middle east.

TIA

 

 

[watchweasol]

Hi Joe  Is this of any use for you.

Wave ceptor Inst manual.pdf

[LittleWatchShop]

Here is my model

Waveceptor casio_qw3747.pdf

[KOwatch]

what demag tool did you used to rotate the hands? What was the procedure?

[LittleWatchShop]

I use a K&D model #202.

I press the button and bring the watch close to the opening.  The hands may go backward or forward.  There have been a few instances where I have to put the watch almost inside of the demag cylinder.

Once the hands start moving, I do not bring the watch closer.