Jump to content

Another reason to be home, UGH!


Recommended Posts

Since 2021, the winter has really set in here. It has been very cold and windy, with nights and even days in the negative numbers below zero degF. We had a huge snowstorm a few days ago with about 30 inches of snow. IDK what that is in centimeters but it is a lot of inches, so even more in cm. We are expecting another 5-9 inches tomorrow and a like amount later in the week. A descending polar vortex (sounds scary, right?) will keep the snow around for awhile. It makes everything feel a bit claustrophobic and frankly, shoveling snow loses its charms pretty quickly.

The mail box is snowed in so I have to go to the post office to get the post, which means all of the bits and bobs for any current projects are not conveniently delivered to our door. Pretty soon Il'' have to put on the skis to get there! Actually, it is not as bad as all of that, but I would certainly need to use skis or snow shoes to avail myself of the many miles of beautiful hiking trails near us.

Anyway, any snow in your area? What are you doing to pass the time?

 

IMG_0271.thumb.jpeg.fe71f52861e889e773aa676be1e0054d.jpegIMG_0285.thumb.jpeg.61cae3bf9e6986edcf5273dfd24e6a1c.jpegIMG_0281.thumb.jpeg.37ae73d6d86640c87142616b285e332c.jpeg

Link to comment
Share on other sites

On 2/6/2021 at 10:19 AM, watchweasol said:

You certainly know how to enjoy your self, shovelling snow lost its charm with me as we lived in a gamekeepers cottage in a wood had to shovel for quarter mile to get the tractor in and out  not fun.

Eeesh. I just got back in after running the snowblower for awhile. Another 6 inches today and more coming Thursday. Ill try not to complain though!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • This is not rare at all, the dial code and case code don't usually match.
    • Good question!! Anyone know of a substitute movement??!! 🤔🙏
    • Interesting issue that I just noticed: this Seiko 5actus Watch from 1977 has a calibre listing on the dial of 7019-8030R but on the case back it says 7019-8010!! Like a mis-printed coin, is this watch therefore worth a lot of money for its rarity?? 🤪😲🤔🤪
    • I wish that was the case. The Aegler movements used in the early days by Wilsdorf & Davis (for brands like Rolex and Rolco) came in several sizes and without designated calibre numbers that survive.  They become a bit easier to identify during the 1920s. Below is an Aegler-Rebberg, 25.74mm in diameter. It’s from a woman’s Rolex wristwatch. Stamped Rebberg and 500 on the dial plate (but it isn’t a Rebberg 500, it’s the wrong size).  I’d be interested if anyone can identify the movement.  It is based off the Aegler Nr.1, circa 1903, but they based many many calibres of different sizes on it. The closest I have to a positive ID is the  ‘Rolex Nr.50’ circa 1917, but no dial side images or movement sizes are available in the references. There are identical looking movements in many sizes.  The 25.74mm of this movement is a particularly strange size for the era, it equates to 11.41 lignes.      Best Regards, Mark
    • It looks like this movement comes with a number of different shock settings. Emmywatch shows that it comes in versions with no shock settings, 'Incabloc', 'shock resist', and 'Supershock'. Perhaps the different settings position the impulse jewel/roller table in a non-ideal position relative to the pallet fork/guard pin. Are you able to check under high magnification if the pallet fork and roller table are able to operate without any interference? Just for fun I took a look and I have one FHF 70 in my collection, a West End Secundus with a non-shock protected FHF70. I had a note with the watch that said, "Movement is stamped 'FHF 70', but the FHF70 looks to have sub-seconds instead of center seconds movement (??)" but that a google search turned up both types for this movement. EDIT: I just took a look in my parts drawer and I have a few of these movements, both in center seconds and sweep seconds, but they all are non-shock protected.  
×
×
  • Create New...