Jump to content

Competent tinker tries out watches

Splitime

By Splitime
in Introduce Yourself Here

 Share

Recommended Posts

Splitime New Member

Splitime

Posted
Posted

Hi everyone, Dave here from the west suburbs of Chicago.  Life long tinker of all sorts, computers/cars/wood working etc... having gotten into watches (one lifelong one to wear at a 10yr anniversary) I've continually thought about working on them. 

More recently I expanded the wrist options with some vintage Seikos from an old friend and knowing they aren't running on time started thinking about service options.  That of course started the slippery slope path of 'why not learn to DIY it'.  So I've been gathering basic tools (very entry level and a few a bit higher tweezers/screwdrivers/oils a few steps up) and picked up the first sacrificial learning movement/watch (used Heritor with a NH35A that is fairly new and keeping good time).

Got excited when the recent batch of tools came in from Esslinger and laid things out, more research in order before I dive much further though (including bringing my ultrasonic in from the garage and picking up cleaning fluids). Turning our antique roll top desk into a really nice workspace vs the shelf it has been for many many years.

The plan is to read/search and read some more vs thread creation, hopefully things go well!

Attaching the 'bench' and the first guinea pig watch.

PXL_20210115_000528735.jpg

PXL_20210106_185331949.jpg

PXL_20210106_185701199.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Part swapper to part maker

      By Neverenoughwatches · Posted

      Next is to drill the screwhole this then provides an anchor point so the bridge doesnt slip around while scribing the shape. A cork lid, a pin and a piece of gaffer tape ( 😅 ) keeps it all in place. The hole is measured from the broken part using a hand measuring gauge. Mark the hole, punch it and drill it off to size. The awkward bit is working out where the jumper should be and the detent positions.  I remember watching a youtuber a while back do this with dividers, so i dug out my old school compasses and improvised a little. This bridge only has one hole and to find the detent positions you need two points of reference, so i just worked the second point from one of the corners, hopefully its near enough. Then scribe in the jumper using the two detent positions ( wind and time set ) that were marked and a big picture of the complete spring to look at that helps to give you a feel of where the jumper should be. 
    • ManSkirtBrew
      Seitz Tool - Help determine if Seitz or not

      By ManSkirtBrew · Posted

      Right now I'm making do with a similar micrometer (the one below is $45 shipped but you can find better deals) and a $20 stand. You do have to be excruciatingly careful measuring jewels, since there's no table, but if you don't have the $500 to throw around, it's a nice option.
    • noirrac1j
      Watch of Today

      By noirrac1j · Posted

      As  I kid, I'd watch Godzilla stomping over buildings and cars and I'd think to myself: Tokyo is a really dangerous place to live... . Cool watch!!
    • Neverenoughwatches
      Part swapper to part maker

      By Neverenoughwatches · Posted

      Next one up an AS 554, looks like a bit more to this one. First job is to check thickness, most springs are somewhere between .3 and .4, this one measures .35, that matches in with the .4 spring steel i ordered. So for marking up a permanent marker comes in handy to colour up the steel to be marked later with a scriber once its dry. Bestfit provide the extra bit of info for the jumper spring that is missing.
    • Hawaiikook808
      Seitz Tool - Help determine if Seitz or not

      By Hawaiikook808 · Posted

      Thanks again, Marc.  Super helpful. I was wondering what the hole was for, and now it makes perfect sense. With your help and the other members here, it looks like I'm good to go with my Seitz tool set. I had to order some replacement pushers, but with those, the set is complete and in good condition. Now, I need to figure out what tool to buy to measure jewels (amongst other watch-related parts). I had my eye on the JKA Feintaster micrometers, but people get crazy bidding on them for $400-600 USD. I was thinking of just a regular digital micrometer (Mitutoyo). Thoughts?  Mahalo. Frank      
×
×
  • Create New...