Jump to content

worksheet anything omega 30T2

gary17

By gary17
in Watch Repairs Help & Advice

 Share

Recommended Posts

Poljot Super WRT Addict

Poljot

Posted
Posted (edited)
13 minutes ago, watchweasol said:

Hi Gary  forund the attached on Ranfft.  The family gereration inclused the 200 series   ie  265.  checkout the attached 265 sheet against th Ranfft oictures.

I think he is search for Technical Instructions / Service Instructions instead of Parts List. Not sure if Omega 30T2 TIs are available. Like someone said before "Send email to Omega asking for something and they will start ignoring your request immediately." Something along those lines :-).

My advice to Gary would be to watch youtube videos on how-to service 30mm Omega movements. Some people produced fantastic videos.

Edited by Poljot
gary17 Super WRT Addict

gary17

Posted
  • Author
Posted

hey

Thanks for replies.

I put this watch away a year ago until i had learned a bit about watches.

It is a early 1944 omega, I believe this to be correct as the movement number confirms it and they did not have the omega sign or caliber number on barrel bridge on the first hundred or so of the conveyor belt. Just 30T2 on plate.(see pics.)

It needs a center wheel and cannon pinion which i can get.

My problems start with all the calibers it is possible to be like 30T2,30T1, 30T2 pc etc.but i think i have nailed it to a base caliber 260.

The other problems are the balance staff and the jewel that is supposed to have a pivot or shaft on it to take the sub second hand.

I put balance staff for a omega 30T2 and it comes up with all the calibers i mentioned earlier so i dont know which one to order.

Also if i am right and the jewel in the plate were the seconds hand should attach should have a pivot or shaft to take the seconds hands it makes it a hell of a lot harder to to try and save it.

I dont know if a jewel from a similar model would be compatible with this movement????

As usual any advice or any mistakes i have made please let me know.

Also if you need more pics.

IMG_20201226_171612.jpg

IMG_20201226_171622.jpg

IMG_20201226_171636.jpg

IMG_20201226_171651.jpg

IMG_20201226_171656.jpg

IMG_20201226_171700.jpg

IMG_20201226_171708.jpg

IMG_20201226_171912.jpg

IMG_20201226_172834.jpg

IMG_20201226_172822.jpg

Poljot Super WRT Addict

Poljot

Posted
Posted
36 minutes ago, gary17 said:

hey

I have found the pivot for the sub seconds. Its on the end of the fourth wheel DOH.

Just what balancs staff now.

cheers

gary

Congrats on "finding" the sub-second hand "thing". Must be frustrating to search for something that has not been installed yet ?

Your balance staff is readily available for "just" £56.16 EACH

Balance Staff ( 1321 ), Omega 260

OME2601321

166 In Stock

https://www.cousinsuk.com/category/filter/omega-movement-parts

rodabod Distinguished Member

rodabod

Posted
Posted

You need a non-Inca (plain) balance staff which is Ronda part 1858. I have them and can do them for a tenner posted if you want one. 

Note that at some point someone has added a punch mark underneath where the balance cock attaches. 

 Share
Go to topic listing


×
×
  • Create New...