Jump to content

Update


greyke

Recommended Posts

2 hours ago, greyke said:

Don't suppose anyone can answer my previous question please

so you would like us to look up your previous question and answer it?

okay let's see how to figure out what your previous question is, I know I'll look on your profile and see if I can figure out that?

so it looks like your previous question was this "Schematic or diagram for 7115 movement" if I answer the question here anyone looking on the other thread won't find it and they'll be confused wondering if anyone answered your question or not? Then there's a problem with that question number 7115 is a nice number but watches are usually made by a company so is this the company name?

usually when people don't post pictures of their watch I go to the site below and look it up for them so we can see a picture and get a little technical description. fortunately there appears to only be one 7115 because otherwise if there was more than one we would be confused.

Normally on pin lever type watches they were never really meant to be serviced. But on this discussion group people have service them before. But typically watches that were meant to be serviced aren't going to have service information. Then even if it did have service information somebody would've had to have scanned it to a PDF which conveniently are not finding in the usual places I look for PDFs. But I did get you parts list it's at the second link. Just because the parts list exist doesn't mean you're going to get the parts. A parts list indicates more information that I thought existed.

then as a reason why you posted an update to ask if anyone has answered your previous question as opposed to asking that in the question itself?

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&Ronda_7115

http://cgi.julesborel.com/cgi-bin/matcgi2?ref=RON_7115

Link to comment
Share on other sites

Sorry, I missed it too.  I have a second job selling insurance, and here in the States it's Medicare Open Enrollment season.  So I just now stumbled on this post.  I get a break sometimes.  I can understand the frustration of needing answers to a pending problem as soon as possible.  We're always willing to help, but it may take a bit of time to find the post among all the others, and if we work other jobs we only have so much time to browse.
Too often, if we do not know the answer to a question, we generally just do not answer at all, so as not to muddy the waters.  If it's a tough question, it may take some time for the right person to find it and answer it.  JohnR725 is a man with a lot of good answers here, and I'm glad he saw this before I did.  With that kind of movement, I am rather surprised, also, that there was that much to find.  I think you're in good hands from here on.

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That's the right technique Mal 👍 If you are ok with a loupe ( which I'm not ) then pick up the dial in your left hand and make a tripod holder out of 3 fingers and then exactly how Mal and me described with your right hand, press and flick out the stem at the same time. You need three fingers to do this, i use my ring ring finger , sounds like mal uses his little finger, just whatever you feel comfortable with. The key point and dangerous side to this is the tweezers or driver slipping off the release screw. Stablise your left arm by resting your elbow on your bench, so that you can hold the movement horizontally flat, use a x5 loupe to view  and good light so you can see well and have a good tight fitting screwdriver to push the release down. Or as suggested a pusher mounted solid upside-down somewhere then all you need to do is push your movement up to it. I'll rig something up in a bit to show you what i mean.
    • Thanks Michael, shes a real soldier, it would take a tank to knock her off her feet.  Shes surprised even me and i knew she was a tough cookie.  Good for you Michael, you keep at it. I've been reading your posts re. your watchroom they're inspiring and it doesn't matter how long it takes you to get there its about the journey. Rome wasn't built in a day, our watchcaves are our solitudes, our own little empires where we can shut ourselves away from the crap that goes on around us in the world. I look forward to seeing you progress, I have my own ideas how i like to do things. But in answer to your questions on that thread, just let your workspace evolve around you and how you work. You wont figure it out straight away but you will know when to change it and when to leave it alone. But most of all just enjoy it.
    • That can be tricky. Sometimes I hold the movement from the edges in left hand and with right hand I push the release with tweezers and simultaneously pull the stem out with right hand pinky or something. 
    • I see what you mean. I must admit I’m not entirely comfortable with that but I can’t see a better method than what you suggest. I’d like to see something like this mirror with a short spike: https://www.cousinsuk.com/product/mirror-for-observing-movements Place it on, push the spike on the post with one hand and release the stem with the other hand. Minor problem, it doesn’t exist.
    • Hope you mum keeps on mending. I was adamant that I was going to get myself going after my stroke. I was only 52. I still have a lot of life left to live. Some people give up. Some people don't let it beat them. Your mum sounds like one of the winners. 👍
×
×
  • Create New...