Jump to content

Replacing a bezel on Animal Brand Watch


Recommended Posts

Dear All,

Please bear with me I'm new to this, have decided to try some basic repairs on some old watches that were lying in a draw. I need to replace the bezel on an old Animal Brand Dive type watch model no. W009 it's at least 20+ yrs old. As you can see from the photos I have managed to get the old bezel off but can't find any ideas on what to do next, although to be fair I'm probably not typing in the right questions. I was wondering if any of you could answer the following questions

1, Are bezels brand/ watch specific or generic

2, what measurements do you take to ensure the correct sized replacement

3,Can anyone recommend an online store to buy the replacement part

The photos are of the watch face and both sides of the removed bezel ( apologies for teaching my Granny), any other info you think might help much appreciated

Regards

Keith

IMG_1007.jpg

IMG_1008.jpg

IMG_1009.jpg

Link to comment
Share on other sites

This is a bit tricky, Animal, as far as i'm aware, have never actually supplied spare parts for their watches.
I don't know if generic replacement bezels are a thing, but I've seen a website before that supplies entire generic watch cases, so i can't be sure one way or the other. 
You might try eBay or something to look for another second hand version of this watch and cannibalise the bezel off of that. 

Why exactly do you need to replace the bezel, is it outwardly damaged and worn or is it the click on it has gone? because you might be able to do something with the spring underneath that's responsible for that. 

Edited by Ishima
Link to comment
Share on other sites

Hi  Ishima, thanks for the reply, I’ve looked round eBay and some are termed generic but wouldn’t know which size to order. You can send the watches away for repair but as you say I haven’t seen anybody selling specific Animal spares. I’ve seen a few  for sale on eBay but all more than I want to spend on a practice project.

Link to comment
Share on other sites

4 hours ago, Keith57 said:

1, Are bezels brand/ watch specific or generic

Specific, but some sizes are common enough.

4 hours ago, Keith57 said:

2, what measurements do you take to ensure the correct sized replacement

Dia and height of the section where it fits, if you're lucky a Seiko bezel might fit or almost, but if it needs adapting then it becomes complicated.

Link to comment
Share on other sites

Thanks jdm, by dia. I assume you mean the face it fits round so I can start having a look although from internet searches I did before posting makes me think it may be a bit more expensive than I want to pay to practice 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Its a touch under ive just remeasured it and added a wrist shot.
    • That's the size of my grandfather's Ernest Borel watch. Definitely not a lady's watch! 👍
    • Thanks H It does have a big crown for the watch , it could be considered a ladies watch these days i guess, it measures 33mm case 36mm with that large crown 18mm lug space. A tad small for a guy of today, but still very wearable. The photo was deceptive so here it is adorning my 7 1/4 " wrist. It need some love to make it run better. The hair coils are touching so running a bit fast at the moment,  not caused by magnetism, and maybe just a clean and a service. The dtal is in fantastic shape.
    • That's one beautiful timepiece! Love the big crown in proportion to the case. Perhaps a ladies' watch, but I don't think so. I have a "modern Ingersoll" watch, but it has nothing to do with the original brand (Miyota 9015 movement). Interesting synonym for synthetic oils! 😆 There is, of course, a limit to how large a volume of oil epilame can bind and hold in place. If the oleophobic effect is too strong then it can become a problem. I'm not sure where I heard or read it, but as I understand it, the active ingredient in a bottle of epilame is extremely small and more than 99% of the contents of the bottle is just a transfer agent. If the active ingredient becomes too concentrated, which it can become over time, or if the product is of poor quality, the oleophobic effect is amplified. This in turn causes the applied oil to look like a gummed-up ball on the surface of the treated part. If that happens, we know that the active ingredient has become too concentrated. What we want is for the oil to bind but not to the point where it is formed into an excessively round ball on the surface. The highlighted text in the patent that you refer to describes well the problem that can arise with too high a concentration of the active ingredient. However, I would be extremely surprised if the entire amount of oil leaves the treated surface as water on wax would. At present, I am convinced that the analogy between wax and water on the one hand and epilame and oil on the other is incorrect. Epilame is described as binding and that is also my absolute experience. Epilame probably has some repelling effect but that is not its main purpose and that is not how epilame is designed and works. The method of abrading the epilame treatment from the section of the pallet stones coming in contact with the escape wheel teeth seems after even more research to be well established, but if it actually works, if so how and why is beyond what I can currently understand. Perhaps it is just to do and trust that it is based on well-established experience. I am, after all, inclined to think so.
    • Sorry to jump in here, but I didn't want to start a new thread when there's already one regarding the second hand watch market. Can anyone tell me what I should be looking at when buying watches from eBay? I see loads on there for quite cheap, but after reading this thread I'm guessing they're all garbage and not worth the time? I recently bought an old Elco watch for 99p, just to practice on. I'm also really fond of the look of Services watches and Smiths Empire watches. I keep seeing them listed for around 5 or 6 pounds. Are they not worth the time buying? I'm not looking to sell watches to make a profit. I just want to buy watches I like the look of and wear them, but I also don't want to buy things that are going to be impossible to find parts for, or that have already been abused by someone else and broken beyond repair. Any tips?
×
×
  • Create New...