Jump to content

Recommended Posts

Posted

As we all know, our world has been deeply shaken. Lifestyles, routines and every partXa,a of our lives have been effected in some way. This is equally true  for our children. Their academic and social life's have also been upended. 

As  a father of 4 who range in age from 15 to 24 this new reality is all too acute. My youngest two are still in high school with one a freshman and one a sophomore. They have been pretty much on their own with getting their online classes up to date and completed. My daughter, who is also my youngest, has been on task the entire time, she had finished her work last week. My 17 year old son has procrastinated much of the entire time. 4 weeks ago he was in danger of flunking. So, as an incentive, I offered to get him his favorite watch which is a duplicate of mine if he finished with at least a C average in each class. In this case, it's a 1978 Timex Falcon Eye. Thankfully I had found one for an absolutely fantastic price, a steal to be honest. When it arrived, it was pristine!

Tonight was his final night. The final assignments were due. He plugged away and by 9:45pm, he crossed the finish line! And as required, no class was below a C grade point average. In fact, only one was a C, the rest were comfortably within B and A averages. I'm very proud of him and it was a Thrill and an honor to present his watch to him. For fun, I had him put on his new watch but told him he was trying on my watch to see how victory feels. He was all smiles and kept saying how awesome the watch is. Then I held up mine on my wrist and put it next to his and said, yep, it's almost as cool as mine! He was like, What!? Is this mine? No way! He was so excited! Totally worth the wait.

Here they are, two of the finest original 1978 Timex Falcon Eye's you'll likely ever see!

20200527_215853.thumb.jpg.4163af1794f9ef947f89e2c96707c251.jpg

  • Like 6
Posted
2 hours ago, Klassiker said:

That's a nice story! What did your daughter get?

She got a couple of those Pop Vinyl figures, a nose piercing and a dozen roses. The only thing she really wanted and had asked for was the nose piercing.

  • Like 2
Posted

Way to go pops! As the father  of a procrastinator  , I feel  your pain! Mine turned out OK as I suspect  yours will. The real world  has a very  sobering  effect. Once they get out there , and find out that in order to eat and pay the  bills  they have  to show up and finish on time they adjust.

Posted

Thanks. I'm actually not the least bit worried about him for his future. He has a clear plan and knows what he wants and what it takes to get there. My middle son is another story. He's very immature for his age. Hoping he turns around some than later. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • What you’re saying is that if the entire coil is lifted or tilted either up or down it is due to a slight twist in the spring? Usually next to the stud?  I’ve chased this before and in one instance the spring came out of the stud and I had to reinstall it and secure it in place.  Do you find that the angle (not twist) the spring leaves the stud not only affects how it centers in the regulator pins but also the coil spacing? This could be caused by a distortion in the spring as it grabs and release the pins. I find turning the stud counter clockwise opens the coils 180 degrees away from it. So do I adjust the stud in relation to the regulator pins or to the coil spacing?  I also find that unless I remove the balance from the cock I can’t see the slight distortions in the spring. In my picture the distorted spring looked fine when installed. Do you use Alex’s technique of sliding the regulator arm up and down the curve to find distortions or can you visually see them?   
    • So if anybody overrides what i say, listen to them haha. I'm not an expert but i've just been in this boat a dozen times as i used to mess up hairsprings bad, but the good part of that was that i got to learn how to fix them.  What made my life SO much easier was learning how to adjust the hairsprings with the balance installed on a disassembled mainplate, unless it's a very serious problem or on an inner coil you can't get to i would recommend trying this in part because the spring will mostly ALWAYS look flat when the balance wheel is not installed on the cock. Install the balance wheel back in the cock and the cock with the cap jewels in the mainplate, with it installed even the most imperceptible twist will be pretty obvious. Just make sure the balance jewels are also installed. In these movements, if 99% of the time any twist or problems gonna be around the terminal curve, twists often near the stud, especially if you've been removing their awfully designed studs from the balance cock. If there's a reliable way to install those things without introducing a minor twist to them i haven't found it. they're an awful design. INstall the balance on you mainplate WITH your capstones/chatones and look sideways across the balance under magnification. Look for the highest or lowest spot of the now not flat hairspring. 180 degrees from that high or low spot is where your twist will be. You have to be VERY careful with twists as the tiniest over or under twist brings it out of flat. If the area i have to untwist is near the stud i just use a pair of #5 tweezers or some very sharp fine curved tweezers and gently see which way i twist it corrects the twist, then i hold the very fine point of the tweezers on the hairspring and just gently squeeze and check it and see if it started to correct it, then i rinse and repeat. Tiny adjustments is what you want, don't close them all the way, and dont' introduce a flat spot in them. it's just a little nudge by closing the tweezers on it at an angle. .  If the twist is not near the stud, i grasp the hairspring with some very fine curved tweezers as gently as possible while still holding it then i do that same sorta tweezer squeeze with my #5's. 
    • Has it got the logo on the crown. I think you're best option is going to be to remove the damaged stem and measure it. Edit Do you have the case reference number.
    • Movement is Omega 1012. I bought this from Cousins: 
    • Welcome to the WRT forum.
×
×
  • Create New...