Jump to content

Audax (Eta 1280)


Marc

Recommended Posts

Another eBay non-runner. I just really liked the look of it so put in a low bid and won it uncontested.

 

post-73-0-07822600-1391526377_thumb.jpg

 

Audax signed 17 jeweled ETA 1280 inside.

 

post-73-0-46454600-1391526361_thumb.jpg

 

It turned out that the problem was both balance staff pivots had broken off. Given that this movement has shock protection this suggested that the watch must have had a really serious whack at some point. However, although not exactly pristine, the case didn't bear witness so any such catastrophe. I suspect that a more likely scenario is that someone had the balance cock and balance out of the watch and was none too careful putting it back, tightening the balance cock screw without the pivots properly seated in the jewels and snapping them off.

 

Fortunately my stock of odds and ends turned up both a replacement staff, and better still, a complete spare movement. I took the lazy way out and simply substituted the balance complete from the donor, serviced the movement, and cleaned it up a bit. Now a great time keeper and a favorite to wear. I can always repair the original balance if I get stuck for something to do on a rainy day.

Link to comment
Share on other sites

That looks like a nice clean example Marc,  another one well worth saving.  The movement does not look used and abused,  so it's difficult to explain two broken pivots,  as you say it would take an almighty whack to do that.  If only these watches could talk they would have some tales to tell.

 

RogerC

Link to comment
Share on other sites

Apart from the broken balance pivots the only other sign of rough handling of the movement is a set of dots imprinted in the train bridge in a grid pattern just below the AX in Audax. Heaven only knows what made them. As you say AW it would be interesting to know a bit more about the history of some of these pieces.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Its a touch under ive just remeasured it and added a wrist shot. Unbelievably it was £13  plus 3 postage. You dont find watches that nice for that money every day of the week.
    • That's the size of my grandfather's Ernest Borel watch. Definitely not a lady's watch! 👍
    • Thanks H It does have a big crown for the watch , it could be considered a ladies watch these days i guess, it measures 33mm case 36mm with that large crown 18mm lug space. A tad small for a guy of today, but still very wearable. The photo was deceptive so here it is adorning my 7 1/4 " wrist. It need some love to make it run better. The hair coils are touching so running a bit fast at the moment,  not caused by magnetism, and maybe just a clean and a service. The dtal is in fantastic shape.
    • That's one beautiful timepiece! Love the big crown in proportion to the case. Perhaps a ladies' watch, but I don't think so. I have a "modern Ingersoll" watch, but it has nothing to do with the original brand (Miyota 9015 movement). Interesting synonym for synthetic oils! 😆 There is, of course, a limit to how large a volume of oil epilame can bind and hold in place. If the oleophobic effect is too strong then it can become a problem. I'm not sure where I heard or read it, but as I understand it, the active ingredient in a bottle of epilame is extremely small and more than 99% of the contents of the bottle is just a transfer agent. If the active ingredient becomes too concentrated, which it can become over time, or if the product is of poor quality, the oleophobic effect is amplified. This in turn causes the applied oil to look like a gummed-up ball on the surface of the treated part. If that happens, we know that the active ingredient has become too concentrated. What we want is for the oil to bind but not to the point where it is formed into an excessively round ball on the surface. The highlighted text in the patent that you refer to describes well the problem that can arise with too high a concentration of the active ingredient. However, I would be extremely surprised if the entire amount of oil leaves the treated surface as water on wax would. At present, I am convinced that the analogy between wax and water on the one hand and epilame and oil on the other is incorrect. Epilame is described as binding and that is also my absolute experience. Epilame probably has some repelling effect but that is not its main purpose and that is not how epilame is designed and works. The method of abrading the epilame treatment from the section of the pallet stones coming in contact with the escape wheel teeth seems after even more research to be well established, but if it actually works, if so how and why is beyond what I can currently understand. Perhaps it is just to do and trust that it is based on well-established experience. I am, after all, inclined to think so.
    • Sorry to jump in here, but I didn't want to start a new thread when there's already one regarding the second hand watch market. Can anyone tell me what I should be looking at when buying watches from eBay? I see loads on there for quite cheap, but after reading this thread I'm guessing they're all garbage and not worth the time? I recently bought an old Elco watch for 99p, just to practice on. I'm also really fond of the look of Services watches and Smiths Empire watches. I keep seeing them listed for around 5 or 6 pounds. Are they not worth the time buying? I'm not looking to sell watches to make a profit. I just want to buy watches I like the look of and wear them, but I also don't want to buy things that are going to be impossible to find parts for, or that have already been abused by someone else and broken beyond repair. Any tips?
×
×
  • Create New...