Jump to content

OMEGA 563

berniethebolt
 Share

Recommended Posts

berniethebolt WRT Addict

berniethebolt

Posted
Posted (edited)

i have a 563 movement plus a 562.i am having a problem with the keyless works on the 563.there seems to be a slight difference between the two!when i came to look at the 563 i found a part which did not seem to do anything,or was in the wrong place.can anybody shed any light on this.everything on the movt.is working fine just need to keep the stem in and working.would appreciate any help.thanks B.:pulling-hair-out:

IMG_20191212_181535p.jpg

Edited by berniethebolt
berniethebolt WRT Addict

berniethebolt

Posted
  • Author
Posted
2 hours ago, watchweasol said:

Hi Bernie    the bit on the plate looks like the piece that retains the stem , running in the stem groove.     I have atteched the tech sheets for both calibers for you to identify th bit.

Omega_Omega 562.pdf 171.6 kB · 2 downloads Omega_Omega 563.pdf 556.43 kB · 2 downloads

Thanks watchweasel but I don't recognise the part on the chart! I know it's not the setting lever, that's already fitted. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Hello from Denmark

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. 
    • Birbdad
      Regulating is too touchy

      By Birbdad · Posted

      I agree with hector it's probably the regulator curve, it almost always is on these movements. So i work on these movements a lot and iv'e managed to fairly consistently get them running at like 50 degrees more amplitude than that with deltas in the 3 range and on the wrist deviations of sub 1 second a day. They ALWAYS require work to get there though. The main thing is shaping the regulator curve and this is really finnicky and definitely something you practice on a movement you don't care about when you're new (I'm still new) but if the hairspring is flat and the coils are evenly spaced and the regulator curve is properly shaped and it's pretty wild how accurate these movements can get.  But, it does sound like your regulator curve maybe needs a bit of reshaping. You can easily mess up the watch learning to do this so warning if you don't want to live with your current results but I"m not an expert, it's just speculation but there's a pretty easy way to check.  This is a good video showing how to see if your terminal curve is properly shaped. Just make sure the regulator pins are open when you test this.   He takes off the balance wheel to shape it. I do it with the movement disassembled but the balance on the mainplate. I use a homemade tool from a sharpened dental pic to do the adjustments (Tiny tiny TINY adjustments) and i use the regulator pins themselves to sorta brace the spring against to bend it very tiny amounts and just keep checking it by moving the regulator arm down it till it stops moving the hairspring. Taking off the balance wheel over and over again is a good way to slip and destroy your hairspring and will make the process way slower. I try to avoid removing the balance wheel from the cock it on these movements due to how difficult it is to get the hairspring stud back into the balance cock. It's super easy to slip and twist your spring then you got way worse problems.  Since these are mass manufactured and unadjusted the regulator curve is NEVER perfect but once you learn how to reshape them it's pretty easy to do and you can get REALLY low deltas with really low positional error and pretty remarkable accuracy.  Definitely with it powered down and the balance on the movement with both balance jewels in place look across the spring to see if it's perfectly flat, then check the regulator curve how he does it in the video. I would bet money even if it's not your main issue the regulator curve is not ideal also. 
    • Embezelled
      Where it begins

      By Embezelled · Posted

      Thanks. Damn, first breakage. This picture of the movement is from the sale listing.  
    • AdsettsEdberg
      Hello from Denmark

      By AdsettsEdberg · Posted

      Hello all, New member here, hoping  to gain knowledge about something that has been of interest for years.  Cheers!
    • AndyGSi
      Where it begins

      By AndyGSi · Posted

      So the stem is snapped and will need replacing but luckily there's enough left in the crown to unscrew without a problem. Will need to see photos of the movement to identify it.
×
×
  • Create New...