Jump to content

fero watch


Recommended Posts

Hi,

My nan has recently passed away. One of the items she had, (presumably was my late grandads), is a fero watch.

I think it is from the 60s, 70s. 

Can anyone advise on its pedigree??

The watch is missing it's crown and stem so I do no know if it works. How do i find a crown and stem?

Does anyone know what type of strap would have been on the watch at the time?

I would really like to restore the watch so any advice would be very much appreciated.

 

Thanks

15754084489656861350997834390150.jpg

Link to comment
Share on other sites

Found this on the Internet.

Within the Swiss watch industry, the Fero brand name and company goes back to before World War One, when Roger Ferner founded Féro & Cie in La Chaux-de-Fonds, in Switzerland. The brand name derives from the name of the founder, taking the first two initials of his two names (FErner Roger). Between the founding of the company and the late 1940s we have a gap in both the recorded history and extant pre watches branded Fero. Apparently, the Fero Watch Company did produce watches under other brand names - Ceneri, Farad, Ferio, Hello, Legation, Legation, Maloja, Pantheon and Tango - and it may be that some of these other names appear on pre-World War Two Fero & Cie watches. I would suggest though that throughout the history of the company, both pre- and post-World war Two, the brand designation in the vast majority of watches was Fero, with or without the name Feldmann depending partly on the date of the watch.

  • Like 1
Link to comment
Share on other sites

As for the stem and crown, the manufacturer of the movement must be determined as well as it's caliber (or type).if you could remove the back and take a very clear in focus picture we could help you determine this.A cell phone camera would be fine . Lay your phone on an inverted coffee cup, this will steady the camera and eliminate shake. Strap? most likely leather, or a facsimile thereof.

Edited by yankeedog
  • Like 1
Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Welcome to the forum, enjoy. I have a varimatic that went  out of sequence because it’s hydronic oil ran very low. Must admit it’s still in my garage just know time to fix it. Purchased a cheap Indian Junta/ sonic Pearl as a stop gap a few years ago and it still performs perfectly so no incentive to fix the Varimatic. 
    • The plate is OK, thanks. It seems the answer to my question is that this is a 'hack' & for me another reminder that in general, one won't be the first person to be tinkering with an old timepiece!. As you day, I've been fortunate to have gotten some good advice and, just as important, encouragement. I've been lucky then not to have the balance spring break as a result of my novice 'ministrations' - but I did remember to 'stroke' rather than bend per se. The clock is of sentimental value to the owner so I'm relieved to have now got it running to time with the support & encourage of forum members like yourself.
    • Recently purchased a L&R Varimatic knowing that the piston does not fully rise in the cylinder. The likely cause is air in the system. The manual calls for using a bleeder cup, which is as rare as hen's teeth.Does anyone have any experience with this issue and if so, how did they resolve it?
    • Thanks ww, its maybe not as much of a bodge trick that i thought it was. 
    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement.  It would be nice if you told us a little about yourself.
×
×
  • Create New...