Jump to content

Recommended Posts

Posted

Hi guy’s! Is there anybody on here who can help me date a poljot watch!

The watch movement is an kamhen 16 jewel M143 0f8ce48082c1e4c67964e5aee9934eb1.jpg

 

 

Sent from my iPhone using Tapatalk

Posted

Hi guy’s! Is there anybody on here who can help me date a poljot watch!
The watch movement is an kamhen 16 jewel M143 0f8ce48082c1e4c67964e5aee9934eb1.jpg&key=22ac9e7dc579b5b6cc66845609c87aa7ee28b08048e04c11bd7300b626e50747
 
 
Sent from my iPhone using Tapatalk

64596207bdd06a4d723dee4f70e57a41.jpg



Sent from my iPhone using Tapatalk
Posted

I believe that "Kamhen" simply means jewels, so 16 Kamhen just means 16 jewels.

The movement is actually a ZIM, and I think it is a 2608. The Russian watch caliber numbers actually describe features of the movement. The first two digits give the size in mm, so yours should measure 26mm, the second two comprise a code for the complications that the watch has like center or sub-seconds, date, shock protection etc.

According to Ranfft production started in 1955. The set lever had a screw until 1957 then changed to a push pin, and in 1959 the crown wheel changed from 2 screws to 1 screw.

Yours has a push pin set lever, so after 1957, and two screws for the crown wheel, so before 1959.

Posted
I believe that "Kamhen" simply means jewels, so 16 Kamhen just means 16 jewels.
The movement is actually a ZIM, and I think it is a 2608. The Russian watch caliber numbers actually describe features of the movement. The first two digits give the size in mm, so yours should measure 26mm, the second two comprise a code for the complications that the watch has like center or sub-seconds, date, shock protection etc.
According to Ranfft production started in 1955. The set lever had a screw until 1957 then changed to a push pin, and in 1959 the crown wheel changed from 2 screws to 1 screw.
Yours has a push pin set lever, so after 1957, and two screws for the crown wheel, so before 1959.

Many thanks for the info marc!
Would you know anything about it value mate! It’s not my watch, it’s a friend i know, he’s into costume dressing up! He likes to dress up with stuff dating from the right era!


Sent from my iPhone using Tapatalk
Posted

Like most Russian watches, if it is serviced and in good working order it is worth far more than you could sell it for.

Value wise if you look on eBay you will find this sort of Poljot going for any where between £5 and £25 depending on condition, it could fetch more but not very likely. Russian watches tend to be very under rated though (in my opinion)and consequently demand far lower prices than their Swiss equivalents.

They are quite capable movements though, and well worth picking up if you're into solid reliable engineering. Unfortunately a lot of them are rather let down by their cases.

  • Like 2
Posted
Like most Russian watches, if it is serviced and in good working order it is worth far more than you could sell it for.
Value wise if you look on eBay you will find this sort of Poljot going for any where between £5 and £25 depending on condition, it could fetch more but not very likely. Russian watches tend to be very under rated though (in my opinion)and consequently demand far lower prices than their Swiss equivalents.
They are quite capable movements though, and well worth picking up if you're into solid reliable engineering. Unfortunately a lot of them are rather let down by their cases.

Thanks marc! Much appreciated mate!


Sent from my iPhone using Tapatalk
Posted
50 minutes ago, Marc said:

Like most Russian watches, if it is serviced and in good working order it is worth far more than you could sell it for.

Value wise if you look on eBay you will find this sort of Poljot going for any where between £5 and £25 depending on condition, it could fetch more but not very likely. Russian watches tend to be very under rated though (in my opinion)and consequently demand far lower prices than their Swiss equivalents.

They are quite capable movements though, and well worth picking up if you're into solid reliable engineering. Unfortunately a lot of them are rather let down by their cases.

    good refural.    vin

Posted
1 hour ago, Marc said:

Like most Russian watches, if it is serviced and in good working order it is worth far more than you could sell it for.

Value wise if you look on eBay you will find this sort of Poljot going for any where between £5 and £25 depending on condition, it could fetch more but not very likely. Russian watches tend to be very under rated though (in my opinion)and consequently demand far lower prices than their Swiss equivalents.

They are quite capable movements though, and well worth picking up if you're into solid reliable engineering. Unfortunately a lot of them are rather let down by their cases.

      I might try buying a watch from e  bay.    vin

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I am aware of one eBay seller who does cases for some American pocket watch sizes and also sells a case tube & sleeve assembly to work with American negative set keyless https://ebay.us/m/qa0ubk Also I have seen this seller many times but have never been clear on how they handle stems and crowns. https://ebay.us/m/4mhfEr I general though I don't think there are a lot of these cases out there, just a few sellers custom making them or adapting AliExpress cases somehow.
    • What type of glue you figure it was. I wonder if acetone dissolves super glue. 
    • What's the movements so we know what size cases you're looking for and what are the setting requirements.
    • As I am getting close, I would like to know the total thickness of the bezel (top to bottom).  I am working on two solutions--one is thinner than the other.  The crystal sits pretty proud relative to the bezel, and seems consistent with the pictures I have seen.  But, actual measurements would be nice.
    • A little bit of superglue and you'll be good to go Although maybe if you had a laser welder you can weld the spring back together. Typically I've only seen it on blued steel Springs and on one occasion a modern spring? The modern watch was a Rolex watch that came and that was literally filled with rust including the barrel was filled with rust in the spring was in a whole bunch of little pieces. I have to wonder if that was an aftermarket mainspring . Then I'm attaching a PDF the Elgin watch company as you can see instigated a study in the 30s find out why mainsprings were breaking. I do though wonder if perhaps there may be a flaw in their study? One other things I wonder about is the metallurgy of the early steel Springs versus the later generation of blued steel Springs whether the metallurgy as part of the problem but in a case they did a study and have attaching a PDF. Because of the study any time I do anything with the blued steel spring when I actually cannot get something that's not blued. Once the spring is cleaned I'm very careful to not to touch the spring with my fingers because I don't want to have a problem with the chemicals on your fingers causing rust and I very carefully get lubrication back on the spring as fast as possible just to avoid these unpleasant situations. Then yes it is interesting one minute you of functional spring and the next minute you have lots of little pieces of spring. For my own personal Elgin pocket watch I put a steel spring and in this happened I'm also guessing that when one layer breaks it sends a cascading shockwave through the spring and that's why it breaks all the way across because after all there is a lot of energy in the spring when it breaks. Oh and my theory on the metallurgy is based on things have improved and for the most part I don't think I've seen a shattered spring in quite some time.   Elgin_Mainsprings.PDF
×
×
  • Create New...