Barrel arbor fitting into the mainspring
-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
By watchweasol · Posted
A better picture of the full movement front and back would be a dream help. Tha nos. Waterbury ckock A merican manufacture a full history can be found on line. -
By watchweasol · Posted
No they did not mix them normally but there is always a chance. It’s somthing to be aware of. -
Excellent. I have not seen that site before. Thank you.
-
Ah, I should have mentioned that I think I have a donor pusher currently installed in an old Slava watch. They look to be the same dimensions (at least by externally measuring with calipers/ eyeball). The donor has a swaged end on the pusher rather than a circlip, so it can't be disassembled in the usual way, so I assumed that I would need to push the whole thing out. I guess if I can measure the tube, I can see if there's a generic pusher, either a screw or circlip type,available from Cousin's that would fit when disassembled. I am not Bulgarian unfortunately, nothing as interesting as that. I am an Australian (actually originally British) with a mother who wanted to give me an interesting name. I do have an interest in Soviet watches though.
-
Recommended Posts