Jump to content

Just Keeping The Collection Ticking Over - Majex And Pierce


WillFly

Recommended Posts

While I await the wearing of my Marvin on Christmas Day, I've been keeping my hand in on eBay... Picked up another Majex - nothing out of the ordinary but quite cheap - and a nice Pierce. Pics below are: (1) Majex face (2) Majex movement (3) Pierce face (4) Pierce movement. I suspect the seconds hand on the Pierce is a replacement, but I'm not too worried at the moment. Pierce made really good movements - this one is Swiss and very nice, but I'm not sure of the calibre. It's stamped with the Pierce name, but that means nothing. I think I can see the figures "29" under the balance - which is not an original Pierce calibre - so there'll be a little detective work to do there at some stage...

 

post-64-0-73105600-1418134365_thumb.jpg

post-64-0-92394500-1418134368_thumb.jpg

post-64-0-37933800-1418134382_thumb.jpg

post-64-0-67962800-1418134385_thumb.jpg

Edited by WillFly
Link to comment
Share on other sites

I've done very little myself - Christmas is with us and so are presents for family - and I've also been forking out for the costs of a CD production run. Me and my mate Chris have out together an album which we're hoping to sell at gigs, and I have to recoup the outlay on that before I buy more watches.

 

Blatant advert to follow...

 

http://www.willandwolfie.info/

Link to comment
Share on other sites

Just done a bit of research on the Majex and the Pierce movements. The Pierce is, naturally enough, a Pierce movement - calibre 103. By a weird coincidence, the Majex is also a Pierce movement - calibre 105! Pierce always used their own movements in their watches, whereas Majex used various stock movements from other manufacturers. My other Majex - the gold one - uses an Enicar 1292 movement. However, as far as these two Pierce movements are concerned, the 103 is slightly superior in engineering and finish to the 105.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi everyone on my timegrapher it showing this do a make anymore adjustment someone let me know ?    
    • Maybe I'm over simplifying this and I'm a little late to the discussion, but just by my looking at oil when I use it on a treated cap jewel  the oil stays in one nice bubble, but when I don't it spreads out to the edges of the jewel. I'm not sure (but could well be wrong) but the analogy of a waxed car and rain is accurate in this case, the wax is very hydrophobic and repels the water, however, the process epilame works by is a different physical process based upon cohesion/adhesion (oleophilic) not repulsion (oleophobic)  at least as far as I have read/observed. If one were to use a oleophobic substance equivalent to wax (hydrophobic) then one would need to create a donut shape to fence in the oil, however if one used such a strategy with a epilame which is oleophilic then the oil would sit on the ring of the donut and not in the 'donut hole', exactly where you don't want it. Even is the oil is smeared then the oleophilic epilame should pull it back to the center (see diagram below). Reference
    • Looks lint the teeth on the hour wheel aren't meshing with the teeth on the calendar intermediate wheel, maybe the hour wheel is sitting on top of this instead of meshing?        
    • If the oil drop was freely standing on an epilame treated cap jewel it could easily slide off if you knocked the watch hard but the balance pivot keeps it in place. 
    • Latest 404 is this Baron which has a copy of a Seiko 66B movement in it, handy when I needed to find a replacement setting lever. Apart from the setting lever, crown, stem and new crystal (original was cracked) the watch is original. Finished result:
×
×
  • Create New...