Jump to content

A nice find in the wild

TexasDon
 Share

Recommended Posts

TexasDon WRT Addict

TexasDon

Posted
Posted

While out shopping last week, I stopped in at my local Goodwill Industries store and browsed their watches. For non-US residents, Goodwill is a business that provides work training and employment for handicapped individuals. They fund a lot of their programs by accepting donations of everything from clothing to furniture to jewelry and then selling it in one of their stores. It's a great place to pick up an odd bargain plus, it helps the community.

I was delighted to spot a Seiko perpetual date 8F32-0019 on display. It was offered for $21 as it wasn't working. It hasn't been two weeks since I viewed Mark's excellent YouTube video about how to change the battery in one of these watches, then reprogram it. I bought it and brought it home. To begin with, this particular example was manufactured in May, 1998 which places it near the end of the product cycle. That caliber has been discontinued for some time now. This particular watch was a game premium at the Big XII football championship which was sponsored by Dr. Pepper, a soft drink brand. They were given to each team member, coaching staff, trainers, important alumni, etc. What makes this one unique is that it was never worn. That's right! Whomever receive it placed it on a shelf in the closet where the battery (10 year battery life on this model) died and the watch lost its program. 

It was donated recently to Goodwill where I found it. I replaced the CR2014 coin cell battery, then reprogrammed it according to Mark's instructions. Thank you Mark. The inside of the watch was basically untouched. At some point, the company that supplied the watches to Dr. Pepper removed the original dial and replaced it with the commemorative one it now sports. The only other issue noted was the date changed at 9:30 each evening instead of midnight. I suspect that whomever replaced the dial didn't bother to properly set the hands when reinstalling them. Additionally, the sweep second hand was off by half the width of 1 second. I corrected those by removing and properly reinstalling the hands. 

Were it not for Mark's original video, I wouldn't have had the knowledge to buy this watch, replace the battery, reprogram it and reset the hands. This is an absolute little jewel of a watch. Additionally, since it operates at 196 Khz instead of the more usual 32768 Hz, these models are incredibly accurate. The factory spec for a model of this type that is worn 12 hours/day is +/- 10 seconds/year. Wow!Seiko8F32.thumb.JPG.84bebbb54f31cb86843e68f93bc8d1e7.JPG

  • Like 2
yankeedog Distinguished Member

yankeedog

Posted
Posted

 I love the Good Will , Salvation Army and the Habitat for Humanity.Any charity that sells donated goods.Everyone wins, you score a bargain, and your money gets put to good use.

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JohnL
      Reusing mainsprings in an automatic and slipping

      By JohnL · Posted

      Ah, well there is the rub. I ordered a post and oscillating weight, but clicked on the wrong thing when adding the weight to the basket adding an automatic bridge. Ordered a weight, and it's somewhere in the ether after our customs and excise folks rejected it because of the documentation.  Yes, both springs inserted the same. "Is the idler gear ok", and here's why I posted to the newbie area: So, reading between the lines, and again correct me if I'm wrong here, the automatic winding mechanism will have an ideler gear, along with the reverse wheels, that prevents over-winding? There is nothing (that I'm aware of) between the crown pinion, crown wheel, and the ratchet wheels to prevent over-winding other than the mainsprings slipping in the barrels.  This is only the second automatic I've worked on. The other, a Vostok, had a very obvious mechanism.  I shall look at the automatic winding mechanism in a bit more detail when I've a bit more time. At the moment I'm taking a glance here now and then when work is dragging 😉 As ever, thank you for your help. Always appreciated.  
    • AndyGSi
      Reusing mainsprings in an automatic and slipping

      By AndyGSi · Posted

      If the weight was worn how does the post look as normally you'd have to replace both. There should be no real resistance at the end and just be able to keep on winding. Did you insert both springs the same and is the idler gear OK.
    • JohnL
      Reusing mainsprings in an automatic and slipping

      By JohnL · Posted

      Assembled and running well, I'm asking after the fact. I'm waiting on a new oscillating weight as this one was worn (they have a reputation for it apparently, no bearings). So I've been winding it by hand, but meeting quite a bit of resistance at the end, more than I think an automatic weight will overcome. It's not quite as sudden as a manual mechanism, but there's very little in it, certainly enough that I would be concerned about breaking something if I continued.
    • mbwatch
      Loose pinion

      By mbwatch · Posted

      Remove the cannon pinion from the dial side first. The "clip" you describe is sort of a metal tab some American companies designed their cannon pinions with in order to make it easier to tighten friction. If that is the problem, the solution is as simple as gently squeezing the tab with tweezers to bend it ever so slightly inward, while supporting the inside of the cannon pinion if possible (it may be harder to support inside since it does not have an open tip as a hollow tube) The cannon pinion should just pull straight off of the arbor on the dial side if you pull it straight up with tweezers. There's no jewel in danger of breaking and the arbor is thick so there isn't much risk of breaking the arbor. But when you are describing that the center wheel's pinion is not turning the arbor, is the pinion firmly attached to the center wheel? If you remove the center wheel and hold onto the rim of the wheel, does the pinion turn independently of the rest of the wheel? It should not.  I'm not sure if this was the case on older Waltham, but the pinion may be threaded onto the center wheel arbor and they are often loose. This was a safety mechanism for a broken mainspring and may just need to be tightened back down. I can't remember for sure, but these might be a reverse (left) thread instead of normal right. And does the entire arbor turn independently of the wheel? Also should not.
    • AndyGSi
      Reusing mainsprings in an automatic and slipping

      By AndyGSi · Posted

      You may get some extra friction on the barrel lid so may not slip as easy but I wouldn't think it's a problem. My suggestion would be to finish the assembly and see how it runs.
×
×
  • Create New...