Jump to content

Hello from the sunny northwest

CJW

By CJW
in Introduce Yourself Here

 Share

Recommended Posts

CJW New Member

CJW

Posted
Posted

Hi all,

After over 15 years off the bench i,ve decided its time to get back on, did a few years at `Mistal Time Services` in leigh 1989 to 1992 then moved to` In Time` before going solo 2 years later.

Spent the last 10 years in South East Asia apart from the odd month or 2 sorting things in the UK, loving the cool UK weather at the moment but doudt my enjoymement will last too long!

Done a few repairs since i`ve been back already so getting back into the swing of things but really need to sort some new tools,

 

Chris

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • watchfellow
      Stem broken - can it be rescued?

      By watchfellow · Posted

      I think that a 814/825 stem would work, there are a lot of compatible parts between these.
    • watchfellow
      Venus 178 hour counter creep

      By watchfellow · Posted

      Hi everyone, I put together a Venus 178 recently, but found that the hour counter "creeps" ie. runs when the chrono is disengaged. This is the similar type of setup as the Omega 861, where the hour counter is driven off the mainspring barrel, but stopped when the chrono is disengaged by a friction spring.  Am I correct in assuming that the friction spring for the hour counter driving pinion should be dry? I am guessing that the issue will be either the spring or the driving pinion, but while the driving pinion has some wear the spring looks decent.  I've attached a couple of photos in case anyone has any tips. Thanks in advance!
    • watchfellow
      Setting power reserve on LeCoultre Futurematic

      By watchfellow · Posted

      Thanks everyone for the replies. It seems setting the hand is a bit of a guessing game, and I thought there would be a very specific way to do it. Since the reserve indicator hand moves clockwise as the spring is wound, I tried setting it right at the start of the black side. But setting it there doesn't really make sense, because by the time the spring is halfway wound, the hand is only at the end of the red side... In my head halfway wound shouldn't mean the hand is still "in the red."
    • Chief
      Intro

      By Chief · Posted

      Lovely part of the country! I spend most of my days driving along the A64 for work in and around York. I'll be sure to drop plenty of questions soon! I've actually got a couple of watches on the way that I'm pretty sure I'll need some help with! They look pretty beat up from the pics but I love a challenge and an excuse to buy more tools 🤣
    • oldhippy
      Help - London Elliott Mantle Clock Night Silence

      By oldhippy · Posted

      I have two of these in my home. You need to remove the movement from the case, take off the hands and remove the dial and take a few good photos of the front plate so I can see what the problem is. The round nut unscrews and the hands pull off pull them off from the center and not the tips as you could break them. 
×
×
  • Create New...