Jump to content

Recommended Posts

Posted

I know nowt about clocks being more of a watch man, and a friend has just bought a GF clock and sent me some pics asking for thoughts. My thoughts were: “I need to ask the good people on the forum!”

Does this look good/bad/indifferent? I’m assuming from the looks of it a good service is needed, in terms of price how does a clock service compare to a non complicated watch assuming it’s just a service and not a repair? About the same or much more or a bit less?

8c26f6e2b0882c308525265c10fb5c2f.jpg

225b6790078f695befd692498da6dccb.jpg

5be34328f4045087baf0dd8a431d760c.jpg

ef50c80cde2cfbd1279d28e555c961fc.jpg

 

 

Sent from my iPhone using Tapatalk

Posted
Could I have a close up of the dial. I need to see the seconds in detail.

I’ll ask him to take one and send across to me. Thanks.


Sent from my iPhone using Tapatalk
Posted
Could I have a close up of the dial. I need to see the seconds in detail.

Found that he’d already sent one to me...
5ed83534d5ca3dde0aa8fa066b931fae.jpg


Sent from my iPhone using Tapatalk
Posted

These Longcases clocks with painted dials are called White Dial Clocks. The hood of this one has what is called a swan neck, pillars going up the side of the case with a decretive full door. A well-proportioned case.  The bottom part of the trunk (red arrow) looks a different colour wood to the rest of the case, it might be the photo, if not then this has received repairs. It is not unusual to find the bottoms missing, in those days it would have been standing on a stone slab floor, the floor would be washed with a bucket of water and the bottoms would turn rotten due to the wet.  

The movement is a four-pillar movement with rack striking and runs for 8 days. It has an anchor escapement and strikes on a bell. The style of the clock pillars are from around the 1800, the same applies to the hands.

The dial is well painted and shows good detail, it has breaks in the painted corners so they do not run into one another from the tops to the bottoms, This means it is not from the very late 1800 but from the early part of 1800. So we know the movement, dial and case are correct. The seconds on this dial tells me it is no later than 1830.  

I for got to post the picture. Here it is.

imageproxy.php.jpg

  • Like 1
Posted
These Longcases clocks with painted dials are called White Dial Clocks. The hood of this one has what is called a swan neck, pillars going up the side of the case with a decretive full door. A well-proportioned case.  The bottom part of the trunk (red arrow) looks a different colour wood to the rest of the case, it might be the photo, if not then this has received repairs. It is not unusual to find the bottoms missing, in those days it would have been standing on a stone slab floor, the floor would be washed with a bucket of water and the bottoms would turn rotten due to the wet.  

The movement is a four-pillar movement with rack striking and runs for 8 days. It has an anchor escapement and strikes on a bell. The style of the clock pillars are from around the 1800, the same applies to the hands.

The dial is well painted and shows good detail, it has breaks in the painted corners so they do not run into one another from the tops to the bottoms, This means it is not from the very late 1800 but from the early part of 1800. So we know the movement, dial and case are correct. The seconds on this dial tells me it is no later than 1830.  


Wow, that’s some knowledge! So it sounds like he has managed to find a nice one. Anything in particular we should check in a movement like this?

Any clockmakers in the Home Counties / west of London you’d recommend to service it?


Sent from my iPhone using Tapatalk
Posted

With Long case clocks they are under considerable force by their weights. It is normally wear that will cause them to stop. So you look for wear in the wheel holes and wear to the pivots and the pallet faces. It is extremely dirty and dry due to lack of oil. The lines need replacing.

Sorry I do not give recommendations on who could repair clocks.

  • Like 1
  • 2 weeks later...
Posted

It might be a relatively simple longcase, but I like it.

I would love to have something like that in the house, although the wife would kill me.

Posted
32 minutes ago, Tmuir said:

It might be a relatively simple longcase, but I like it.

I would love to have something like that in the house, although the wife would kill me.

Longcase clocks particularly the 8 day ones are very collectable.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Not always that simple. Typically the only reason we would have any way of identifying a watch is if parts were available at any time and somebody had a parts reference book then they would help you to identify the watches that they have parts or. Unfortunately there are hundreds of thousands of watch movements with no identification and of course typically no parts the classic place were watches would be identified would be under the balance wheel and your pictures don't really show a good view of that. Occasionally I've seen watches marked under one of the plates. They felt very proud of their watch is a very prominent Swiss company and they ask he stamped the bottom of a plate so you have disassembled find it. Then there is the other system the keyless parts make up something called the fingerprint system but you still haven't given us enough information to make use of that. Here's an image showing what a fingerprint system looks like. The PDF is based on the physical book the physical book has sizes of watches these are smaller ladies watches and keyless parts which in the physical book are printed at the actual size of the watch parts. So to identify with the keyless we need in your case diameter measured on the dial side and a good picture of the keyless parts and then you have to hope that this was made within the right time span of the books that have this system on the other hand a lot of times on the dial side they will also put markings. So basically to identify a movement it has to come out of the case and has to be disassembled.
    • The strap is a 44Q6JB and hadn't realised how much they'd gone up in price. The used one I've got is very worn but may have other links floating around.
    • @Mercurial is this also a variation of the tool you posted? 
    • Thanks Andy, The bracelet is sized very small, around a 14cm wrist. Were would one try to source original links, I guess they wouldn't be cheap if found. The bracelet end links have 4406 B-E stamped on them, is this the Seiko Bracelet code ?? CJ  
    • If it's 16mm at the clasp then you need to order a 16mm extender. How short is it and have you tried looking for extra links.
×
×
  • Create New...