Jump to content

Bedat watches

cduke

By cduke
in Your Watch Collection

 Share

Recommended Posts

cduke WRT Addict

cduke

Posted
Posted

Hello all,

I 've heard some really great things about Bedat watches and wanted to hear from anyone who has had experience with them.  Aside from the stylings, which is subjective, the automatic movements are supposed to be top notch in quality and construction.  Any thoughts or opinions?  They advertise the AOSC regarding all swiss manufactured components which I assume is not a bad thing in watches. Yes? No?

Link to comment
Share on other sites
wls1971 Distinguished Member

wls1971

Posted
Posted (edited)

I have not heard good or bad things about the brand, which seems to be targeted at the women's market although they used to sell mens watches at one time, they use E.T.A movements. 

They can however be bought with huge discounts most of the time and end up on many of the discount watch dealer sites in America and one high street jewellers where I live seems to have them advertised all year round at 50% off although prices of 70% off can be found.

 I would put them in the bracket of a overpriced expensive fashion brand, this is not to say they are bad watches, they just don't seem to sell at the prices they recommend for them.

Most seem to mirror Cartier designs to some extent so lack originality and most of the designs use fancy shaped crystals so in a few years time could present a problem when trying to replace seals and crystals.

Not a brand I would recommend to anyone, and judging by the prices they fetch at auction and on Ebay the value goes down like a lead balloon on the secondhand market.

Edited by wls1971
  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Knebo
      Epilame / Fixodrop

      By Knebo · Posted

      Yes, I was referring to the (jewelled) gear train with HP (most of the time, I use 1300, but when Rolex says 1000, I'll use 1000).
    • JohnR725
      Without Our Forum

      By JohnR725 · Posted

      did I miss the update of the message of something changing?      
    • JohnR725
      Epilame / Fixodrop

      By JohnR725 · Posted

      I suppose it would depend upon what your lubricating with those? for instance what does the manufacturer say about those lubricants? I have a PDF from the manufacture and a rather peculiar statement found on the bottom of the chart. my suspicion is the reason the recommending would be without epilam the HP oils like the spread except when they're in Ruby jewel's with steel pivots. tableEN lubrication 2020.pdf
    • oldhippy
      Is this a 'hack' ?

      By oldhippy · Posted

      These types of hairsprings become weak with age and very fragile. Which I expect it is that giving you trouble, and that wheel is not the correct one, if it were not bent I don't think the movement would run as the teeth are not the correct height. The problem you have is price which depends on you. It can be repaired but is it worth it to you, because there is little value in the clock. A wheel can be made and hairspring replaced. Or hang on to it and keep looking on ebay which is your best bet for replacement parts or even a complete movement but it will be like finding a needle in a haystack. 
    • Knebo
      Epilame / Fixodrop

      By Knebo · Posted

      I did that also for a few movements - well, mainly in/around the train jewels. I made big efforts to epilame the mainplate WITHOUT getting Epilame into the Pallet fork jewels (where it's not supposed to be, right?). I made litte barriers with Rodico around that jewel and used drops from a syringe to apply on the rest.  However, I've now stopped doing this. For three reasons: 1. It's a hassle and consumes more of this liquid gold. 2. I didn't see the need when using HP1000/HP1300 lubricants and grease for most part. The two places where I'd use 9010 (i.e. escape wheel and balance) receive Epilame in specific places... or the cap-jewel-setting of the balance suspends the oil sufficiently be capillary action (see my "conflict" about using Epilame on the balance jewels).  3. Lastly, and here I really wonder about yours and others' experiences: I felt that applying Epliame to the train jewels left them looking hazy (borderline dirty) compared to the (painstakingly achieved) sparkly clean results of my cleaning process. I just can't help but think that the Epilame residuals would mix with the oil and cause more friction/wear. I don't know.    simple: it'll stay there. It won't move any further. That's exactly what is happening if you epilame a cap stone. You end up placing the 9010 right on top of the epilame and the oil will sit nicely on that spot.
×
×
  • Create New...