I answered 10 questions, leaving 10 to topics. I don't know where the fault is.

[perfectkyo]

• 1. Question

  Which of the following can aid you with picking up small parts where using tweezers may be problematic…

   

  • Pegwood
  • Rodico
  • Finger Cotts
  • Watch Oilers
  • Your Fingers
   

• 2. Question

  

  Please study the picture above and complete the following statement…

   

  • The above components form part of the mechanism.

   

• 3. Question

  Please complete this following…

   

  • The Going Barrel is made up of four components:

    • The Barrel
    • The
    • The Barrel Lid
    • The Barrel Arbor
   

• 4. Question

  Please sort the following components into their relevant watch sections – hover over the image, click and drag to the correct section…

   

  Sort elements

  • 
  • 
  • 

   

  • KEYLESS WORKS

  • ESCAPEMENT

  • THE TRAIN

   

• 5. Question

  

  Which of the following is true…

   

  • D5 is a watch oil typically used to lubricate watch escapement parts such as the balance end-stones and the escape wheel teeth.
  • D5 is a watch grease typically used to lubricate watch back gaskets.
  • D5 is a thicker watch oil used for heavier friction points such as the mainspring barrel or centre wheel pivots.
  • D5 Is a de-greasing agent used to remove old deposits of lubricant
   

• 6. Question

  Watch escapements are designed to offer the two primary functions…

  The first is to allow the train of wheels to lock and be released

  What is the second?

   

  • It provides impulse or power to the oscillator.
  • It directly provides the gearing ratio to allow the hour hand to rotate 12 times slower than the minute hand.
   

• 7. Question

  

  What is this?

   

  • A Cylinder Escapement
  • A Cylinder Drum & Barrel
  • A Fusee Escapement
  • A Fusee Drum & Barrel
   

• 8. Question

  An Armoured Glass, made from perspex, is typically used with some types watch cases in order to provide a higher degree of water resistance. How is this achieved?

   

  • A special type of adhesive is used.
  • A metal ring provides extra tension.
  • Water pressure causes the glass to expand.
   

• 9. Question

  Which section of the watch allows you to interface with the watch in order to wind the mainspring and set the hands?

   

  • Motion Works
  • Keyless Works
  • Escapement
  • The Train of Wheels
   

• 10. Question

  

  Study the picture above – these are the parts which make up the Keyless Works section in a basic mechanical watch. But there is a missing part – which one?

   

  • Stem
  • Setting Lever
  • Yoke
  • Setting Lever Spring
  • Yoke Spring
  • Sliding Clutch
  • Winding Pinion
  • Setting Lever Screw
   

• 11. Question

   

  

  Watch Escapement

   

  Please complete the following statement…

   

  • The Pallet Fork locks and releases the escape wheel. There are two jewels installed into the pallet fork, these are called the ‘ stone’ and the ‘exit stone’.

   

• 12. Question

  

  What is this tool used for?

   

  • For blowing air to dry parts
  • For applying oil
  • For applying a cleaning solution or de-greaser
   

• 13. Question

  

  The HOUR HAND is fitted to the HOUR WHEEL

  What part is the minute hand fitted to?

   

  • Centre Wheel
  • Minute Wheel
  • Cannon Pinion
   

• 14. Question

  

  The above mainspring has an s-shape to it. Why?

   

  • The additional reverse coil formed provides extra power as the mainspring unwinds.
  • The additional reverse coil formed is a by product of the modern manufacturing process.
  • The additional reverse coil formed stops the mainspring from slipping out of place.
   

• 15. Question

  Select all the parts in the list below which belong to the Motion Works…

   

  • Hour Wheel
  • Minute Wheel
  • Centre Wheel
  • Cannon Pinion
  • Sliding Clutch
  • Ratchet Wheel
  • Setting Wheel
   

• 16. Question

  The Cannon Pinion is directly fitted to which other part, and what does it drive?

  Choose from the following possible answers…

   

  • The cannon pinion is friction fitted to the Third Wheel and drives the Minute Wheel.
  • The cannon pinion is friction fitted to the Centre Wheel and drives the Minute Wheel.
  • The cannon pinion is friction fitted to the Centre Wheel and drives the Hour Wheel.
  • The cannon pinion is friction fitted to the Going Barrel and drives the Minute Wheel.
  • The cannon pinion is friction fitted to the Going Barrel and drives the Hour Wheel.
   

• 17. Question

  

  What are these?

   

  • Spring Loaded Bars For Retaining The Crown & Stem
  • Spring Loaded Bars For Retaining Watch Straps
   

• 18. Question

  Select ONLY the parts below which form part of the watch Escapement…

   

  • Balance Complete
  • Escape Wheel
  • Mainspring Barrel
  • Crown Wheel
  • Pallet Fork
  • Click Spring
   

• 19. Question

  Please choose from the list below the common places you might find the manufacturers mark and/or calibre…

   

  • Under the balance wheel
  • The train wheel bridge
  • Barrel bridge
  • Stamped on the underside of the watch dial
  • Engraved inside the watch back
  • On the main plate under the dial
   

• 20. Question

  

  What is this tool used for?

   

  • Removing power from the mainspring in a safe and uniform manner so as to prevent breakages.
  • A professional tool for setting the hands on vintage pocket watches.
  • A tool for safely removing a friction fitted cannon pinion from its installed location.