Jump to content

Recommended Posts

Posted

I've owned this "Accutron" branded chronograph for quite a few years.  It's had numerous battery replacements.  Last years, I the 1/100 hand stopped resetting (the other hands reset fine).

Last month, it stopped completely and I thought that the battery was dead. I  put in a new battery and it is still dead in the water. 

Accutron_Lunar_Pilot_Eagle.jpg

This blog entry about the watch says is uses the ETA 251-282 movement
https://robswatches.wordpress.com/2011/06/21/bulova-chronograph-2006/#comment-648

From what I find, that movement does not have a date.

Some pictures of my movement, which appears to read 251-292

20171110_180404.jpg

20171110_180434.jpg

20171110_180525.jpg

I've found two similar movements:

http://www.startimesupply.com/merchant2/merchant.mvc?Screen=PROD&Product_Code=ETA251292-4S&Category_Code=09-Movements

And

http://www.startimesupply.com/merchant2/merchant.mvc?Screen=PROD&Product_Code=ETA251294-4A&Category_Code=09-Movements

Will either work?

Star Time Supply won't sell to a hobbyist, is there another retailer that sells this movement?

I found this one on Ebay, sold by a Greece seller.  It does have the date at 4 O'clock:

https://www.ebay.com/itm/ETA-251-292-Genuine-Movement-251-292-Quartz-251292-Date-at-4-white-dial-NEW/263427762010?hash=item3d5584a75a:g:NtYAAOSwHm5ZtpAJ

I know the watch doesn't have great monetary value, but it was gift from my wife, so it has sentimental value

Any advice is appreciated!

 

 

Posted

Just so you know, your battery clamp is in the wrong way. Shouldn't actually effect it, but I have to say it. 

I'll let someone else decide if any of those would work as alternatives but I'm assuming straight off you'll find something different that is some sort of problem. I don't want that responsibility when you'd be paying so much. :D

Posted

Hello,

I have an account with Star time. The watch movement you've mentioned is the correct one, and if you want the date at 4 o'clock then you click on the other link to specify the 4s date wheel:

5a659e86047c9_ScreenShot2018-01-22at3_15_47AM.thumb.png.95e19657c0caa28d77c5f498fe386ac4.png

As you can see, it's not cheap, so maybe the movement from Greece would be a better deal if you factor in shipping. I would be willing to order it for you if you decide that's the best choice.

J

Posted

Thanks for tracking that down.  So that looks to be a very good Quartz movement?  I'd be Ok making that investment.  But, I really struggled in working on my Hamilton Quartz chrono this weekend, I don't think that I can remove the chronograph hands.    I just sent you a PM

I did flip that battery hold down, but no dice.  The stopwatch flyhand moves and resets, but the secondhand doesn't move.

 

 

3 hours ago, noirrac1j said:

Hello,

I have an account with Star time. The watch movement you've mentioned is the correct one, and if you want the date at 4 o'clock then you click on the other link to specify the 4s date wheel:

5a659e86047c9_ScreenShot2018-01-22at3_15_47AM.thumb.png.95e19657c0caa28d77c5f498fe386ac4.png

As you can see, it's not cheap, so maybe the movement from Greece would be a better deal if you factor in shipping. I would be willing to order it for you if you decide that's the best choice.

J

 

  • 3 weeks later...
Posted

Well, thanks to some help from a forum member, the Accutron is back in business.  That ETA movement was indeed the correct one.  The sweep second hand didn't fit, so the hand that came with the new movement was painted to match.  Everything works perfectly!

image.jpg

image.jpg

image.jpg

I definitely didn't baby this watch and it's had its share of abuse, I decided that the case needed a polish, and I'll be sure to treat it a bit more carefully moving forward.

Thanks for the help!

Accutron_Polished.jpg

 

  • Like 1


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Welcome to the forum. You're best starting with something that you know runs well and keeps good time. That way when you've stripped and service it, any problems are due to something you've done.
    • Welcome to the WRT-Forum! Sorry to say it, but you’re very likely to break or lose something when servicing a wristwatch for the first time — I’ve been there! So, if these watches have any value to you, don’t attempt to service them as a beginner.
    • In writing "shimming the staff" I was alluding to the idea trailed in the above referenced thread of inserting a hair along the staff which, as the discussion there covered,  could result in some eccentricity. By making a (more or less) complete cylinder I was hoping to avoid that problem. Don't tell anyone, but needing a very ductile metal to do this by manipulation at such a small scale, I used a piece of an empty Tomato pureé tube! It occurred to me that the material's ductility(?) would also put less stress on the RT in forming a sufficiently tight seal. Anyway, that's how I avoided the temptation to use glue. No doubt your punctuational response to this confession will be "!!!" !
    • Hi All. I would appreciate some advice for a complete newbie on getting into watch servicing - nothing serious,  just as a fun project. I've got a thing for hand-wound watches and would like to bring an old watch (or two) back to life, so looking to learn to do a strip-clean-oil-assemble cycle.   I've toyed with this idea in the past (years ago) and picked up a couple candidates to learn on, but never found the time for them.  One is an old Ingersoll, swiss-made 17 jewels. It seems to wind and tick. Casing, dial, glass are in great shape, so looks like a good candidate to me for the first service. The other is a Benrus DR23. It winds and makes a few reluctant ticks, but then seems to stop. Casing looks like a complete gonner, and the dial is in pretty poor shape too. If the movement is not broken and just needs a service, I wonder if there's any possibility of getting a cheapo Chinese casing & dial to fit this movement in, or is it extremely unlikely to be the right size?   For a start, I want to strip & assemble a movement, perhaps a dozen times to build up the basic parts handling skills. I see that online advice is to buy a Chinese-made ST36 for this purpose. Can I just go at the Benrus or Ingersoll instead, or does it make more sense to get a cheap ST for this? Thank you.    
    • Hi,  I have this vintage Navitimer 806 with a bezel that plays a little bit as shown in this video: https://imgur.com/a/2NjdiF0 How would you fix this? I don't see where a gasket would fit for instance. Also, it seems this issue happens sometimes with older Navitimers.  Thanks
×
×
  • Create New...