Jump to content

Recommended Posts

Posted

I picked up a nice 9ktgold Smiths Astral on Fleabay at the weekend. It is running well and just needs a bit of tidying up cosmetically. I serviced one for a friend of mine last year and was really impressed with the quality of the watch, especially the movement. Since then I had been on the lookout for one.

post-124-0-81497200-1407224284_thumb.jpg

  • Like 1
Posted

Show us the internals please.   :startle:

I've still a few things keeping me busy just now Roger, but I will remove the movement when I refinish the case. As I said, I've worked on one before and was well impressed with the movement.

Posted

Here's the movement from my grandfather's British Rail retirement watch - a Smiths De Luxe - I think they used the same movement as the Astral:

 

post-64-0-97173000-1407236691_thumb.jpg

post-64-0-49610300-1407236706_thumb.jpg

Posted

The astral is pretty much the same Will. The De Luxe was a slightly better movement, it has the balance wheel with the screws in it and the Astral doesn't. My one will have a plain balance wheel, but being slightly younger, it will have shock protection.

That's a nice watch Will, I'm partial to subsidiary second dials.

PS I will have to get some treatment, I'm sure you passed on your disease just when I was starting to get clear of it!

Posted (edited)

As mentioned they are very nice movements and look the equal of a Swiss watch and probably better than some.  Any ideas as to what killed off the English mechanical watch?

Edited by autowind
Posted (edited)

As mentioned they are very nice movements and look the equal of a Swiss watch and probably better than some.  Any ideas as to what killed off the English mechanical watch?

In a nutshell, the English watch manufacturers didn't respond to change. They carried on in the same ways as they had always done and were overtaken by Swiss horological development - and gradually they lost customers and money. Swiss (and American) mass production methods produced fine watches that were the equivalent of - and even better than - English hand-made equivalents.

Edited by WillFly
Posted

In a nutshell, the English watch manufacturers didn't respond to change. They carried on in the same ways as they had always done and were overtaken by Swiss horological development - and gradually they lost customers and money. Swiss (and American) mass production methods produced fine watches that were the equivalent of - and even better than - English hand-made equivalents.

I would also guess that they weren't big or diverse enough to survive the quartz revolution.

Posted

Show us the internals please.   :startle:

Here you are Roger.

The movement and dial are in excellent condition and it starts from barely half a turn on the crown. Because of this I am not going to service it just now, but I will make a slight adjustment to the regulator as it is about one minute fast per day.

I will also tidy up the case and crystal while I have the case open, unfortunately someone has been trying to open the back with a knife when they should have split the case at the bezel. The damage is not too bad and I will be able to sort it out.

One thing that I do find strange, is although it is an English watch, the case was hallmarked in Edinburgh in 1968.

post-124-0-62322300-1407312084_thumb.jpg

post-124-0-98892600-1407312111_thumb.jpg

post-124-0-35408100-1407312145_thumb.jpg

Posted

It may well be that the movement was either cased by an Edinburgh jeweller or that there was a stock of Edinburgh-assayed cases in Edinburgh. My Swiss Majex with the AR movement also has an Edinburgh hallmark - for 1955.

  • Like 1
Posted

Geo, Quality speaks for itself, very nice.  I had a look on the Bay and they were asking what I thought was silly prices for a basic watch, way beyond my purse.  There was also an automatic Everest which was around the £600 mark,  I think they are being a bit greedy myself.

Posted

The automatic Everest watches whereas good as Smiths got and mint ones do fetch really big bucks. I've seen them as high as £1000 / £1200.

There's an Astral buy it now £97 or offers in need of repair on Fleabay. The buy it now price is about £10 more than the scrap value of the 10 grams of 9kt gold.

Posted

Man that's an elegant watch!

 

I'll really like to see a write-up on restoring case finish and glass. 

All the tips and tricks **Hint Hint Geo**

That's just as important to learn as repairing the movement.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • If a runner, I usually let the movement run in naphta for a minute, some movements need a bit of encouragement to run in liquids, so a quick dip of the movement in naphta then remove and encourage the oscilator with puffer, repeat several soaks.  Or if you don't want to soak or dip the movement in cleaning solution ,   keep putting naphta on jewel holes as the movement runs on bench. A pre-clean of some sort  helps.  Avoid lifting out the fork with tweezers or any tool.  Try blowing fork pivot out  with strong puff of air from jewels holes back side. Good luck .      
    • 60! Wow, that's a lot. Can't say I understand the problem because disassembly is usually quite uneventful, except for springs launching into space. Most people break pivots during assembly. I use a homemade brass pry tool to loosen parts. It's just a short length of hard brass wire sharpened to a chisel point. Don't pry at just one point and crowbar it out. Pry at the notch and when a crack opens up, slip the pry tool in and loosen it at a few more points until the bridge is free.
    • Beginner here. Of about 60 watches I’ve serviced and repaired, I’ve broken a pallet pivot on three, always during disassembly, and usually when the old oil has transformed to glue. Each watch was Swiss, in case that makes a difference. Here’s what happened in each case: - unscrewed the pallet bridge or cock - gently inserted a screwdriver in the  slot under the pallet bridge or cock - gently but firmly rotated the screwdriver, avoiding a forwards force on the screwdriver. If alignment pins stick, the cam action is alternated back and forth between back corners of the plate. - heard a small but horrible click. Is there a special tool or technique for safely lifting the pallet bridge? Should everything be soaked in naphtha before beginning disassembly if there’s any sign of old oil gluing parts together? Thanks! Rob
    • You shared this test with me a few months back on a Hamilton project and so I had checked this watch to find the pins were still equally spaced. Their screw slots were undamaged and very tight hard to move so maybe no one has messed with them before. I can't work on it much today but I did measure the fork slot again and it seems like 0.44 is the right size. I measure the jewel that had been installed at just 0.42. would an undersized too narrow impulse jewel impact the impulse drastically? I ask because I have had it at a state where flipping the fork manually with a tool would unlock some of the time, but the balance was never capable of unlocking.
    • This was what I was afraid of. The movement is not one of the generic black square modules. Remove the movement from the clock and try prying it open very carefully, without breaking the plastic tabs. The plastic might be brittle from age. Clean the wheels and check the battery contacts for corrosion. Check the PCB for bad solder joints. Take plenty of photos along the way.
×
×
  • Create New...