Jump to content

Mido Commander - Cal. 2834-2 - 28,000 A/hr Automatic


WillFly

Recommended Posts

Mido have been a major watch manufacturer since 1918 and have produced a number of innovative designs and numerous chronometer models. The "Commander" was first introduced in 1959 - I believe this one from my collection is around 1970 - and had a unique monocoque design. You can only get at the movement by taking off the bezel/crystal and front unloading from the otherwise watertight case.

 

The dial has a Rolex-like day window and date window, and the automatic movement beats at 28,000 A/Hr. I love it.

 

post-64-0-27895000-1405934379_thumb.jpg

post-64-0-79799600-1405934390_thumb.jpg

Link to comment
Share on other sites

Tidy watch Will.

I think you should post a picture of the movement though! ;-)

Mmm... I'm not going to fiddle with the case on this one just yet! (You tempter). But here's a picture of the movement from another watch:

post-64-0-44283300-1405944550.jpg

Link to comment
Share on other sites

You must have piped me at the post on that one Will!! ;) ...The strap is aftermarket and fits not too bad...I have a few Mido's which you take out via the front and can be a bit tricky sometimes. Would look great on a leather strap. If its running fine I'd leave well alone.

I'm sure I read a post about giving each other the heads up on ebay??

Link to comment
Share on other sites

The seller threw in a leather strap for free after I'd got the watch - very nice chap to deal with. So far, it's keeping excellent time - and it has a second hand hack, which makes it good for really accurate time.

 

Bought it on a whim just before the auction ended. Sorry you got pipped, Ash...

Link to comment
Share on other sites

You must have piped me at the post on that one Will!! ;) ...  I'm sure I read a post about giving each other the heads up on ebay??

Ash, you might be interested to read how I collect watches using eBay, just to demonstrate the complexity of my use of eBay... I'm a very serious collector of watches - within the parameters of my watch interests.

 

1. I actually scan through eBay almost every day, and sometimes twice a day.

2. I scan for auctions finishing in a couple of days, and no further.

3. Anything which catches my eye and meets my criteria, I add to my "watch list" - so...

4. My watch list might have anything from no items to over a couple of dozen items in it at any one time.

5. I do a fair amount of research into the items on my  watch list.

6. As the auction end-time gets closer for each item, I look at the bidding, check my budget, and decide whether I want to snipe it or not.

7. If an item gets chosen and is earmarked for sniping - i.e. I really want it and can afford it - I calculate a snipe amount which, I hope, will ensure a win - and then enter the snipe.

8. Nine out of ten times, my snipe wins the auction.

 

Given that that's my strategy, I'd find a mutual heads-up on eBay would flood the Forum with my activity! As you can see, I take it very seriously indeed.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I wish that was the case. The Aegler movements used in the early days by Wilsdorf & Davis (for brands like Rolex and Rolco) came in several sizes and without designated calibre numbers that survive.  They become a bit easier to identify during the 1920s. Below is an Aegler-Rebberg, 25.74mm in diameter. It’s from a woman’s Rolex wristwatch. Stamped Rebberg and 500 on the dial plate (but it isn’t a Rebberg 500, it’s the wrong size).  I’d be interested if anyone can identify the movement.  It is based off the Aegler Nr.1, circa 1903, but they based many many calibres of different sizes on it. The closest I have to a positive ID is the  ‘Rolex Nr.50’ circa 1917, but no dial side images or movement sizes are available in the references. There are identical looking movements in many sizes.  The 25.74mm of this movement is a particularly strange size for the era, it equates to 11.41 lignes.      Best Regards, Mark
    • It looks like this movement comes with a number of different shock settings. Emmywatch shows that it comes in versions with no shock settings, 'Incabloc', 'shock resist', and 'Supershock'. Perhaps the different settings position the impulse jewel/roller table in a non-ideal position relative to the pallet fork/guard pin. Are you able to check under high magnification if the pallet fork and roller table are able to operate without any interference? Just for fun I took a look and I have one FHF 70 in my collection, a West End Secundus with a non-shock protected FHF70. I had a note with the watch that said, "Movement is stamped 'FHF 70', but the FHF70 looks to have sub-seconds instead of center seconds movement (??)" but that a google search turned up both types for this movement. EDIT: I just took a look in my parts drawer and I have a few of these movements, both in center seconds and sweep seconds, but they all are non-shock protected.  
    • Any info on this watch would help. I know that it's sterling from London but I could not match the o letter date or make out makers mark.  Is the movement maker Camberwell or Lamberwell?   If I give it a twist it will run for about ten seconds.  $45 yard sale find.  I don't think that I want to service a fusee.  What quality is it?
    • Hello As I am learning, does anyone have any recommendations  on Repair and sourcing in Gold Coast, Qld, Australia ? eg old Seiko coil 4002920 Thanks. Cheers, Ken
    • Is this what all you're looking for? 
×
×
  • Create New...