Douglas1701 Posted February 7, 2017 Share Posted February 7, 2017 (edited) I was wondering why you dont lubricate the peice under the screw since its a friction part? Where it rubs against the screw head. Edited February 7, 2017 by Douglas1701 Link to comment Share on other sites More sharing options...
Douglas1701 Posted February 7, 2017 Author Share Posted February 7, 2017 4 hours ago, Douglas1701 said: I was wondering why you dont lubricate the peice under the screw since its a friction part? Where it rubs against the screw head. Maybe so the click is audible?? Link to comment Share on other sites More sharing options...
matabog Posted February 8, 2017 Share Posted February 8, 2017 (edited) That screw is just a safety measure for the setting lever not to fall when you unscrew the setting lever screw too much. I don't think it touches the setting lever when the setting lever screw is tightened Edited February 8, 2017 by matabog 3 Link to comment Share on other sites More sharing options...
Douglas1701 Posted February 10, 2017 Author Share Posted February 10, 2017 Thanks...figured it was something like that or mark would have oiled it. Ive seen alot of videos on youtube, but marks are the very best ones. 1 Link to comment Share on other sites More sharing options...
jjfast Posted February 11, 2017 Share Posted February 11, 2017 Marks videos are the best, I have learned a lot from his great clear video... Link to comment Share on other sites More sharing options...
Recommended Posts