Jump to content

My first vintage timepiece


sweeney90

Recommended Posts

So I recently acquired my first vintage watch and was hoping to hear the opinions of more knowledgeable people than myself, it's made by JLC around 1940s the case is 10k gold filled its currently in working order, it doesn't have the original band, to my eyes the condition didn't seem to considering the age so I dished out £200 to acquire it. Any thoughts or opinions on restoration, the quality and price I paid would be greatly appreciated as I'm new to this and intend to start my own collection. IMG_0751.thumb.JPG.c134e78c45862e4c61fdaIMG_0752.thumb.JPG.45ec7d256dd3906202991IMG_0753.thumb.JPG.ebb117762b23fc29f3e15

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Welcome! Very nice watch, if you look closely with a mag glass at back cover you maybe able to see a date scratched in case, watchmakers used this practice to determine when they serviced watch, I suppose for warranty? Sometimes its a series of numbers and date. If you plan on wearing then professional service is in order, even though it's running, oils and grease can dry out over time and may damage jewels, springs and pivots, etc. Personally, I don't like metal bands they tend to wear lugs, nothing like a fresh leather strap! Dial restoration can be expensive, so if you can read it I would leave alone. Crystals are relatively inexpensive, (and can be polished instead of replaced) make a watch look new, something else to consider.

I'm far from an expert, just a nut who likes these kind of things, WARNING: collecting can be addictive!:biggrin:

Link to comment
Share on other sites

That's a nice looking watch with a nice looking movement. Just remember this a watch case that has corners is more likely to get dirtier then a round case. Fitting a dust proof button can help. It is surprising how dirt can get in under a glass that has corners.     

Link to comment
Share on other sites

Thanks for the warm welcome and reply guys, I'm glad some of you like the watch, I can't seem to find nothing on the back so I guess over the weekend il take it to a few of the local shops and see what they have to say about getting it serviced, I totally agree with you@wileydave I'm not a fan of these expansions bracelets either and I do plan on getting a genuine JLC strap but I didn't realise how expensive they actually are, well I think il stick to the "if you can read il leave it alone" philosophy on dials I've heard it can get rather expensive and I kind of like the aged look it has, once I have this piece sorted and as clean and good as it can be, il try to acquire something in better condition I fill I've already learned it might be worth forking out a little bit more at the start because il only end up spending on getting it fixed anyway, yes can imagine it does become addictive my girlfriend has already said I spend all the time on my talking about watches and I'm only on my first piece haha,


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
    • When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • The first one is an Unruh max stake for pushing out staffs
    • Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
×
×
  • Create New...