Jump to content

Elgin pocket watch being stubborn! How does it come out?

Gary

By Gary
in Watch Repairs Help & Advice

 Share

Recommended Posts

oldhippy Distinguished Member

oldhippy

Posted
Posted

Take the bezel of, pull the stem out to the setting hands position, I can see the case screws are out so just gentle push the movement out a little from the opposite end of the stem this should start to release the movement from the case.  

  • Like 1
WillFly Distinguished Member

WillFly

Posted
Posted

You probably know this already, but just in case you (or others) don't, it's worth remembering that, unlike modern watches, the crown and stem in old pocket watches are an integral part of the case, not the movement. So the crown has to be pulled out to its furthest, otherwise it could be bent when the movement is taken out. There's usually enough leeway when the stem is fully out for the movement to drop out by turning the case over. If it's slightly stuck - as in this instance - Oldhippy's advice is spot on. Take off the bezel and gently push the movement out with the stem full out.

 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • jhoho202
      About repair watch's jewel.

      By jhoho202 · Posted

      First of all, thank you for the pdf file of the book on how to replace a gem. So, if there is a problem with the ruby in the movement, should I buy a new or used movement and replace it? When I watch videos on YouTube of people fixing used watches, I feel like there should be a way to buy a gem. Is there no way to buy it?
    • praezis
      Parts sourcing for FHF 180 movement

      By praezis · Posted

      I suppose @donutdan is not forced to earn his living by repairing watches.  I suppose he does it as a hobby and wants to gain experience, to get better in watchmaking and time is not the issue. Then @donutdan should rather try to repair the damage instead of swap parts from a maybe intact other movement. Swapping parts is not watchmaking. And often swapped parts are not the expected solution of all problems. All mentioned damages are repairable. Frank  
    • Malocchio
      Chinese tools debate

      By Malocchio · Posted

      Yeah I figured that one out when I googled and realized that my spindle is actually from Horia. It's smooth with no screwable cap.
    • JohnR725
      Parts sourcing for FHF 180 movement

      By JohnR725 · Posted

      I am puzzled by something a snipped out something from your image and what exactly disassemble tell us? my confusion is the symbol for FHF looks like image I have below year symbol as a star and righted this instant are not finding what that means? I suppose we could use the fingerprint system to verify it really is what it claimed to be. Size itself is really interesting there's almost no watches in that particular size. Then were missing details in the photograph above like diameter of movements to verify it really is the size and are missing the setting components.   went to the bestfit book looking at the symbols didn't see it. Look at the link below I did find it back to the bestfit book and yes it really is there https://reference.grail-watch.com/documents/history-of-ebauches-sa/ then bestfit book says lists the size as 10 1/2. one of the problems with vintage watches is finding parts yes a donor watch would be good.
    • Simeon
      Oiling Dubois Depraz chrono module pivots (Omega Speedmaster Reduced)

      By Simeon · Posted

      Actually, this could be the issue. Drag from the module could be overcoming the cannon pinion. It was definitely not at the point that the driving wheel was loose on the cannon pinion, it took a little bit of effort to rotate it when applying the grease. Maybe I need to look again at applying oil to the pivots.    Yeah, it's very annoying. I don't want to give up on it, so back on with it over again until I catch a break. 
×
×
  • Create New...