Jump to content

Help with removing the movement

buzz12

By buzz12
in Watch Repairs Help & Advice

 Share

Recommended Posts

Geo Distinguished Member

Geo

Posted
Posted
16 minutes ago, buzz12 said:

Thought as much... yikes!

It' not that difficult.  Start with carefully pressing a single sided razor blade into the join between the case and the bezel to start it lifting, follow using a slightly thicker Stanley blade and finish off with a case knife. 

Link to comment
Share on other sites
buzz12 Watch Enthusiast

buzz12

Posted
  • Author
Posted

Sorted, not sure if it was supposed to come off with the bezel, but I took the glass out with a vigor. I had tried shifting the bevel but no joy. Anyway I got my movement out that's the main thing. Cheers guys

Buzz

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • valleyguy
      Quality Chinese Tools

      By valleyguy · Posted

      An update to my post above, i got this type of bezel remover yesterday, absolutely perfect, the build quality is very good, no slop or play, perfectly aligned, no manufacturing defects, i've tried it on a couple bezels and it just works how it should, it's a solid bit of kit, i'm more than impressed. The scores on the door say it's a 10 out of 10 from me. What a difference in build quality from the first bezel remover i got, i slagged the first bezel remover off as chinese junk but this one makes up for it.  
    • Marc
      Looking for Diafix cap stones 011221

      By Marc · Posted

      You could try here
    • Simeon
      Looking for Diafix cap stones 011221

      By Simeon · Posted

      Hi, I am looking for some Seiko Diafix cap stones. Managed to play tiddlywinks with one.    Seiko part number 011221
    • VWatchie
      My polishing achievements so far

      By VWatchie · Posted

      I remembered that when Lititz Watch Technicum's YouTube channel existed, they had a video about polishing. As I recall, many experts thought that video was among the best on the subject of polishing. It's a real shame that their videos are no longer available and I've been in touch with them regularly to see if they can get these videos back. Unfortunately, it seems that these videos are gone forever. The last message I received from them on 21 January read: "I'm sorry, but not yet. In a nutshell: the school is scheduled to be shut down next year - a new school is bring opened in Dallas, Texas. Because of that all video access is blocked. If a decision is made to not close the school, then at some point the videos will likely be made available. We just do not know that yet. So, just check in again in a month or three; sorry I can't be more specific than that." Well, as I recall, there was a section in the video that was about how to preserve the edges of a watch case, that is, how to avoid rounding off the edges when using a mop wheel. I don't remember all the details but what I do remember is that it's about keeping a high speed on the mop wheel and keeping a light pressure on it. I didn't think of this when I was polishing the case back but the next time I'll try it and see what difference it makes.
    • RichardHarris123
      Case Tube Tool - Quest for one that works

      By RichardHarris123 · Posted

      Good idea, I  was thinking of something similar but using a drill press.  Apologies, all the other comments have just appeared.  I was replying to @HectorLooi , the chain pusher is a good idea too.
×
×
  • Create New...