Jump to content

Fleabay??


Recommended Posts

I'm trying to look at expanding my very small watch collection, at the moment stands at two !! Is there anywhere peps can suggest having a look apart from dealer-bay! It's too commercial now, or has been for anything for a long while!!, I'm looking in a normal persons prospective, not a mega bucks dealer.

Regards,

Ian

Link to comment
Share on other sites

It's a mixed bag. I've used eBay to buy and sell mainly, but not totally, watches, and I've also used The Saleroom -  http://www.the-saleroom.com/en-gb - which is an online live auction house facility. They have their pros and cons.

 

Local Auctions

If they're local and you can travel, they can be good. You can inspect the goods before bidding, talk to the auction room staff, and there are no postage costs - just travel costs. Buyer's commission can be high - my local house charges 22% buyer's commission and VAT on the commission itself. Other houses charge anything from 15% upwards.

 

Online live auctions

With the exception of one or two auction houses which specialise in watches - like Fellows (Birmingham), you get very little description of the goods - far less than the best eBay sellers. So, to be sure, you have to email for a condition report, which might be useful or not. I usually ask, "As far as you can tell, does the watch (1) wind (2) set (3) run?" You pay the same commission as being there, plus - if you use The Saleroom - another 3% of the selling price for the privilege of bidding online, plus the postage and packing costs, which will never be less than around £15. So - modified rapture - but I've picked up some bargains over the years.

 

eBay

I always look for auction lots - rarely buy-it-now lots, unless there's a "best offer" attached - and I always look for lots with a sound description and good photos, where possible. I avoid auctions with "Private bid" bidding lists, because I don't trust them. I set my filters to (1) UK only (2) hand-wound movements and (3) Time: ending soonest - and sit back and see what I get! The eBay buyer's commission is nil - much better than any auction house - and postage costs for watches are much less, on the whole. As long as you're careful, have some idea of what you're really after, and always remember: Caveat Emptor - Let The Buyer Beware - you can get some bargains. The lovely Oris wristwatch I got recently - working beautifully and looking gorgeous in its new strap - was just £26. That's a snip for a watch of this quality.

 

Just my 10-penn'orth! I think you have to define what you want in your collection - and then take your time and look carefully.

Edited by WillFly
  • Like 1
Link to comment
Share on other sites

Thanks Geo. I forgot to say that, as far as bidding goes, I take two approaches. If a watch is a cheapie - and I only want to buy it as a cheapie - I place a low bid at the last minute. If I don't get it, no worries. For something that [a] I really would like, and that will probably rise in bids at the last minute, I snipe. I set a maximum on my sniping service and then wait until 10 minutes before the auction to see if it's worth raising the snipe. (My sniping service allows no  changes to bids after six minutes before the auction ends). If I don't win, I don't get charged for the snipe - if I win, it costs me £2, which is why I only snipe for reasonable quality stuff.

 

Oh - and I always check the seller's ratings before bidding. I don't mind the odd 0.1 or 0.2% below 100% - anyone can have an off moment - but anything 98% or below I tend to leave, no matter how tempting the offering.

 

I also set my eBay filters to "Used", and I check unknown Swiss watch makes against: http://www.mikrolisk.de/

Edited by WillFly
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Right now I'm making do with a similar micrometer (the one below is $45 shipped but you can find better deals) and a $20 stand. You do have to be excruciatingly careful measuring jewels, since there's no table, but if you don't have the $500 to throw around, it's a nice option.
    • As  I kid, I'd watch Godzilla stomping over buildings and cars and I'd think to myself: Tokyo is a really dangerous place to live... . Cool watch!!
    • Next one up an AS 554, looks like a bit more to this one. First job is to check thickness, most springs are somewhere between .3 and .4, this one measures .35, that matches in with the .4 spring steel i ordered. So for marking up a permanent marker comes in handy to colour up the steel to be marked later with a scriber once its dry. Bestfit provide the extra bit of info for the jumper spring that is missing.
    • Thanks again, Marc.  Super helpful. I was wondering what the hole was for, and now it makes perfect sense. With your help and the other members here, it looks like I'm good to go with my Seitz tool set. I had to order some replacement pushers, but with those, the set is complete and in good condition. Now, I need to figure out what tool to buy to measure jewels (amongst other watch-related parts). I had my eye on the JKA Feintaster micrometers, but people get crazy bidding on them for $400-600 USD. I was thinking of just a regular digital micrometer (Mitutoyo). Thoughts?  Mahalo. Frank      
    • Yep, that's exactly how it should fit. The reamer shank is tapered and the socket in the spindle is also tapered so that the one centers in the other and is gripped tightly. If there is any wobble when the reamer is seated as far it will go then there is a problem. The cross hole in the spindle is to allow you the push the reamer back out again. If the reamer seated much deeper then it would limit the access for pushing it back out again. Here is one of mine for comparison.
×
×
  • Create New...