Jump to content

Upcycling an old clock case

AndyGSi
 Share

Recommended Posts

AndyGSi Distinguished Member

AndyGSi

Posted
Posted (edited)

This maybe sacrilege to some but while things are quiet at work I decided to turn an old clock case into a display cabinet.

This is phase 1 with just a little more touching up required.

IMG_20250411_103840.jpg

Edited by AndyGSi
  • Like 1
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted (edited)

Being a joiner , I shudder at some of the things people do to old furniture. An example my sister wants my french polished Elm Ercol table and chairs that was bought by my parents when I was born....and paint it !!!😵. Saying that re-purposing can bring an unused unwanted piece back up life.  What you've done Andy looks great 👍. It depends entirely what you are covering over, once done there's no going back.

Edited by Neverenoughwatches
  • Like 3
watchweasol Distinguished Member

watchweasol

Posted
Posted

Not sacrilegious at all. Repurposing redundant objects I always consider a good thing , somthing that may well have been put in the tip has another useful life. May I suggest maintaining the horological theme use it for displaying your watch collection . Somewhat fitting for the old clock case. 

  • Like 5
spectre6000 Distinguished Member

spectre6000

Posted
Posted

What's the intended use?

In college, I repurposed an upright grand piano into a bar. Complete with wine glass racks, bottle racks, shelving, and a flip top for storage of bar tools. The only parts used that didn't come from the piano to begin with was paint and some track lighting that went behind the wine glasses. Eventually got tired of moving it around between apartments, and sold it for a small fortune. 

  • Like 2
AndyGSi Distinguished Member

AndyGSi

Posted
  • Author
Posted
20 minutes ago, oldhippy said:

🤬

If I told you it already had a quartz movement in and the dial is about 0.5mm thick would that make it any better?

I'd thought about doing it with this one but gave it to a friend instead.

image.png.4928a3cf77fb955d96ef2d89a3e812b8.png

  • Haha 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • tIB
      Seiko 6105 crown gasket service

      By tIB · Posted

      Ive asked this at a Seiko forum but I know there's plenty of experience here too...   As I have it the recently discovered servicing technique on these is that you stuff the crown full of gaskets and work it until the recessed washer pops, remove the washer, switch the gasket out, dish the washer and push it back into place, levelling out the washer in the process? First attempt did not go to plan... I tried using a plastic pusher to manipulate the gaskets in the crown... Wasn't strong enough and I was struggling to even get the gaskets in up until it broke.   Rethink consists of making/using actual tools: I don't have a staking set, so I've got the old man fashioning a metal pusher, essentially a 2.45mm OD tube with 1.6mm ID with a 6mm press the other end. Also got him on a dishing block/conical stake (sorry I'm terrible with terms) and a holder for the crown while I'm working on it...   I figure that's enough to do the process described above? Push with the metal pusher, dish the washer with the conical stake, press back in with wider flat press (drilled centre so it doesn't catch on the tap).    Plan is to stuff, press by hand and repeat? If that doesn't work by hand I've a drill press I could attach the pusher to for a little more leverage if needed. (Obviously I don't want to go too mad with that, and hopefully can avoid it altogether...)   Sounds like a plan? I'd welcome any advice here, since I really don't want to wreck a crown. Having replaced all the other seals though id really like to sort these too. I welcome any input/advice from those who have been there and done it... Thanks!
    • watchweasol
      Hello from Ottawa Canada

      By watchweasol · Posted

      Hello and welcome to the forum.  Enjoy
    • AndyGSi
      Make groove Case steel 316L - without lathe

      By AndyGSi · Posted

      You need to be more careful modifying the dial area. How does the bezel/lens fit on the front?
    • zx6rfool
      Sorting through Grandfathers watches

      By zx6rfool · Posted

      Recently inherited a box of my Grandfathers watches, nothing valuable, but some cool and some unique items.  Seiko SQ, my aunt went to Hong Kong in the 80's I believe and picked one up for my Dad and Grandpa. Below are picture, I believe its a 1987 5Y22-8A08. Put a new battery in it and it fired right up! Its probably been a drawer for 20+ years. Looks like he only wore it a few times.   Citizen Quartz 46-9181 with a seven jewel 7961B movement. It had what looked like some moisture damage, and a corroded battery. Swapped it with a 371 but it would only vibrate the second hand. Tried trouble shooting while in the case but eventually ended up pulling the movement out and cleaning with some naphtha and blowing it out and running it on the demagnetizer for a while to free up the movement before cleaning the band and case lightly oiling and reassembling everything. Now its back up and running. Based on the adjustment of the band I believe my Grandmother actually wore this watch, and I made the mistake of telling my wife that. Now its her watch! The most interesting so far is a 72-73 Benrus.  I tried putting a battery in it, but no joy. Ran it on my little tester, no signal from the coil, tried to spin it up. Just the slightest flicker of the second hand. Put some naphtha where I could reach, and tried again to spin it up. Nope. This watch is interesting in that it does not look like the back comes off, there is a window you unscrew to access the battery, a huge SR44. Ordered a crystal puller and will begin disassembly next week.  I was able to find a little bit about this watch though a google image search; BENRUS H010 TECHNIQUARTZ 1972 1st US made Quartz made by Benrus. Using a custom E-block with the step Motor, a power switch and a Moto Chip driven by MotoQ at 32KHz, on modified ETA mechanical movement. https://www.crazywatches.pl/benrus-h010-techniquartz-1972  
    • SAMyMAS
      Make groove Case steel 316L - without lathe

      By SAMyMAS · Posted

      It’s done and the movement feats/aligns perfectly in the case. I stripped off 10mm wide sandpaper and wrapped /sticked it around the pad with double sided tape. I run with 400 grit and finished with 1000 grit. Now I can continue with my build, I’m going to buy a dial and hands. The dial I am considering is a larger diameter 36.5mm than the allotted space 35mm in the case, so I will apply the same ‘technique’ with sandpaper and Dremel/drill. Thank you @RichardHarris123, @AndyGSi and watchrepairtalk community for your help.    
×
×
  • Create New...