Jump to content

Recommended Posts

Posted

You mean, is it a genuine Cartier, or a fake? The photos are not great, but I would guess genuine. Off the shelf movement with no decoration. Plated case?  Nothing special in watchmaking terms, and in poor condition, so not worth much either. Have you handled it yourself, or only seen these photos? 

  • Like 1
Posted

I'd agree, it looks legitimate.

It's got the appropriate rebranded ETA movement that is in a lot of those Cartier models.

The value is down to the name on the watch and very much it's overall condition; it looks like possibly $1000 for an absolutely immaculate, perfect one - but with a rough looking case, a lot less. 

 

 

Posted

I would say its correct but it is at the very low end of Cartier models in other words nothing great and the case is in a very poor condition. Looking at the screws in the movement having damage the movement has not been looked after very well. This all adds to the condition. 

Posted

This movement was definitely used by Cartier back in the day. I always understood that Cartier only did solid precious metal cases, with the Must collection being sort of an exception with gold plated silver. I have seen one that came to the shop from Cartier, so validated, that was in a plated case. It was a bit of an oddball though, with a Valjoux 23 chronograph. That's the only plated case Cartier I've seen- and it was for the U.S. market.

 

So for me it's a "maybe". If the dial printing looks impeccable (including the tiny Cartier in the VII number), could be real. In any case, haha, with the case in that condition and not being gold, not a high value piece.

Posted

Or possibly a "frankenstein" with the case originally from a different make, plus a Cartier movement & dial? There are quite a few movements about at reasonable prices.

One here that looks built from parts - what looks like a Rotary logo on their version of the movement, plus a Cartier dial and with an unbranded tank case:

https://www.ebay.co.uk/itm/235777037899

 

  • Like 2
Posted

I looked into fake Cartiers a couple of years back lots of info out there regarding fakes, my gut feeling is that its not genuine but i am by no means an expert on cartier. The must was their cheaper side of the market in gold plated silver....vermeil,  whether they made any in steel, i cant quite remember. They often have a tiny print of Cartier in the roman numerals that fakers can miss , though any print can be copied. The Cartier Tank was at one point the most forged watch.

Posted
1 hour ago, rjenkinsgb said:

Or possibly a "frankenstein" with the case originally from a different make, plus a Cartier movement & dial? There are quite a few movements about at reasonable prices.

One here that looks built from parts - what looks like a Rotary logo on their version of the movement, plus a Cartier dial and with an unbranded tank case:

https://www.ebay.co.uk/itm/235777037899

 

I can't believe the number of people bidding on this.

Although saying that, most look like newbies who probably haven't got a clue!!!

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Righty ho, I re-serviced the chrono module and got a reasonable result with minimal loss of amplitude when not running the chrono and about 30 degrees loss when running. Great. The problem is now that the chrono (and movement) stops running after about a minute or so, a tap on the watch starts it running again. No issues with the movement running when the chrono is stopped. Going to service it yet again, obviously some residual issues with friction in the chrono module (Very frustrating - I wish there was some way of testing it as I go!) I also seem to have a problem with the cannon pinion where the movement is running continuously (with the chrono stopped) but it's losing significant time / stopping. This is one of those two piece ETA style with a driving wheel pressed over the cannon pinion, obviously arranged for driving the chrono module. I had no issues with this prior to service and just added a small amount of grease between the driving wheel and the centre cannon pinion as the technical guide required. What's the best way of tightening these up? I would like to replace it but I guess this is going to be hard to find as it is dedicated to the DD chrono movement. 
    • He uses the micrometer cap, but he leaves the spring out (you can see that in the video). If you leave the spring in, the spindle will move up as well (as shown by @Knebo).
    • Seems like he doesn't have the micrometer cap  attached to the spindle so he can only push down but cannot pull up? If the cap screws into the spindle I guess you don't need the spring? I only have a "normal" Seitz so I really have no idea. 
    • Do you have a part number for the bearing shim lock tool?
    • Yes in my opinion the 3/4HP is plenty but it’s your decision & yes it does come with speed control but foot operation so my reason for changing to potentiometer was because my leg shakes so it was like me revving the lathe & anyway I prefer to set the speed. I & a few others that I recommended the motor to run a Pultra 10mm lathe so if you have a 6 or 8mm B & L then it will be plenty, if you have seen any of my videos you will have seen that when using a graver I run quite slow without any problems. Dell
×
×
  • Create New...