Jump to content

Dives watch


Recommended Posts

have a question you already know I'm still learning watch repair my question was what watch movements are except able to be a dives watch meaning is just the qaurtz movements and automatic movement can be a dives watch can a mechanical movement be a dives watch ?

Link to comment
Share on other sites

it's not the movement. It's the case for a watch for diving it has to withstand being in water and typically the watch companies like to brag about how deep the watch can go. So basically they will make watches that go so deep that the diver could not possibly where the watch because they can't go that deep.

  • Like 1
Link to comment
Share on other sites

I mean let's say a was to make a dives watch is this mean as long the case is a dives case and a fits the movement it should be ok and is this means any movement longs it fit the dives case?

Link to comment
Share on other sites

39 minutes ago, Murks said:

as long the case is a dives case and a fits the movement it should be ok

Murks,

In theory, yes. For example I have a Seiko dress watch (dress style case) with a 6309 movement in it which I would not take diving, similarly, I have a Seiko divers watch with the same movement in it (6309) which is a diving watch. The only difference is the case (and crown sealing system), the diving watch case is made for diving due to it's more robust seal system on the case and its a more rugged design.

Seiko 6309 divers watch:

image.png.7e9518644de3663dff53cf2fdfd686bd.png

Seiko 6309 dress watch:

image.png.34f6bba18dcb991091195ee378530b1c.png

Edited by Waggy
  • Like 2
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I'm guessing, but this commercial demag machine maybe produces random magnetic fields to re-randomise  the iron particles. So heres one for you, synthetic rubies are coloured predominantly with chromium oxide . But natural rubies and old synthetic watch rubies were also coloured with iron oxide in higher percentages than chromium oxide. Which gave them a degree of.................🤔
    • I've never had a hairspring distort on me by passing the movement or just the balance in a plastic pot over this demagnetiser. Have you seen how fast a cleaning machine spins to spin-off fluid and that does no harm to a hairspring. I was a little concerned when I first used it, thinking it might be too strong, but I was wrong. It is strong, but it does no damage. I pass the part over the demagnetiser and keep going for about an arms length, so about a metre, to properly demag the part.
    • I don't think you would be able to find spare parts. Your best bet would be to get a new movement from eBay. https://www.ebay.com/itm/256508500506?itmmeta=01HY3M863PSA61GK7B859QCWTE&hash=item3bb9191a1a:g:ubgAAOSwrJJgPP-s&itmprp=enc%3AAQAJAAAA4DxWhpiQiz2ZjKpm3PS%2FHPh4IafsSzMWEobc2q4qQWgPGMZ8kCR8y2PRsm7GE31FjeSDYSWcEyGlrpZEdQyyzOSgsgsaPjbP7dYmK8r49Nh%2BEtSqDDIZ8Tbp3vvX035fFXgcjc1GEH8l%2FOWJ9aTeWNGzeBgUwqyhJ3ZSXji50TQr6rd38Sqwaqsj2oc51UVKqqIKySKTfxVB7X09EXcJsmeYc5GCdVODNkb02q2RsxfSIzpgl9dFCmW1Ih%2BPg2j2NziSELg5AfaHl%2FPU2Zn9fNnoVN1Z1NUAREyh2BCubcWC|tkp%3ABk9SR_bhoPTwYw
    • Here's a thought. Try unscrewing the bezel and the crystal. If you have one of those sticky balls for undoing casebacks, I would give that a try.
    • Last week I noticed my Eco-drive's second hand was stopped at 12 o'clock. I left it in the sun for a few days and no change, so I figured it was time to replace the rechargeable battery. I've had this guy for at least 15 years. Replaced the battery and the seconds hand moved to about 5 o'clock and stopped there. I let it sit for a day in the sun, no change. I took the battery out and tested it, and it's at 1.4v. The old one was at 1.0v. I'd like to test if it's charging. I've been looking around for diagnostic info, but only been able to find the owner's manual. Anyone have a reference for it?
×
×
  • Create New...