Jump to content

Well preserved Illinois 4s 11 jewel pocket watch which Is part of my collection.


Recommended Posts

This is grade 131 Illinois guilt movement made in 1887. I purchased this watch in a lot of two pocket watches at an estate auction a few years ago, it was tagged with a paper tag which made me think it had been part of someone else's collection.

This watch is in immaculate shape especially considering the age, the thin glass crystal is perfect with a flawless dial. I performed no work on the case other than an ultrasonic cleaning.

The movement was not running and was full of sewing machine oil or something like that. It needed a pallet jewel and I put in a "better" mainspring out of another grade 131 movement.

Later on, I adjusted the mean time screws so that I could centre the regulator as it was running 1 minute fast set all the way slow. I seem to recall it was fairly accurate, but It was awhile ago, and it is not a watch I wear frequently.

illinois.jpg

957hlyvx68fa1.jpg

z13l4zvx68fa1.jpg

0ffa2zvx68fa1.jpg

  • Like 1
Link to comment
Share on other sites

10 hours ago, oldhippy said:

Here is a a list of the types of American pocket watch Crystals. It might interest you.

https://www.daveswatchparts.com/pwcrystals.html

I've been using the UV glue with a UV lamp but the idea of heating the bezel up is interesting, I would be worried about the crystal cracking on cooling if it was a thin crystal. I've installed mineral glass crystals in place of ahistorical plastic ones on several antique watches.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Welcome to the forum, enjoy.. Normally if a hand wound watch does not fully wind ie just keeps winding there is an error with mainspring, either slipping around its winding arbour or the mainspring is broken. 
    • Most all my 404 candidates are coming from swap meets and "antiques fairs". One more $4US plus battery and elbow grease. Unnamed digital on a decent ss bracelet. Gains 10 seconds a day so not that accurate...
    • I voted.for the 6.99 assuming £, which works out to $8.74US at the current exchange rate.
    • £4.04 originally worked out to $5, or thereabouts accounting for currency fluctuations. Inflation calculator from 2020 (when the thread was started, though not when Andy coined the term) says we're looking at $6 currently. What currency is the 6.99 inflation adjusted figure cited in the poll? $6 may still seem restrictive, but don't forget that's part of the point. It's a challenge. Thrill of the hunt and all. Diamonds in the rough. Also, and my personal angle on the game, a fun and inexpensive way to learn watchmaking skills.
    • Hey guys. I'm currently having trouble with my handwound Hamilton Khaki Mechanical with the H-50 movement. I usually give it a full wind when I take it out of the box (which if I remember correctly was around 45 winds) Then I would rewind it in the morning which usually took 12-15 winds. When I feel resistance I stop winding - that's what my watchmaker told me and what I read and hear online all the time. Well, all of a sudden my watch doesn't reach that point of resistance anymore! I can keep winding as if it was an automatic movement. The watch is still running pretty well at -10s/d Now, without having opened it I wonder what could be the problem here. I have a hunch that my son might have taken the watch and overwound it while I was not looking but in that case - how is the watch still running? Thanks in advance for your thoughts. I'm fairly new to the watch repair hobby and I'm not sure I want to try my hands on this watch – I'm still not done butchering my first project…  
×
×
  • Create New...