Jump to content

Waldan watch mechanical or electronic


Recommended Posts

I picked up a non-runner watch at the flea market today and when I got home and opened it, I was scratching my head. Is this a mechanical or electronic movement? I did a quick search and discovered "electronically timed" is marketing hype.  it's mechanical, a cheap pin pallet design. The balance spring has seen better days. Can the spring be repaired? Unless it's an easy fix, I don't think I can repair this watch. The movement looks somewhat crude but the dial is nice. Thanks for your thoughts.

waldan back.jpg

balance spring waldan.jpg

Link to comment
Share on other sites

Hi. Yes it’s just hype just about every watch is electronically tested.    The balance spring terminal curve is distorted and it’s out of the regulator which is probably why it’s distorted.     Just remove the balance from the watch and most of the distortion will disappear.    Lay the balance on its cock and post some pictures it’s not that bad.

  • Like 1
Link to comment
Share on other sites

Interesting marketing strategy rather than impressing the customer with the quality of the watch or the feel or anything else let's print words on the back of the case to impress the customers.

Then ever since the electronic timing machine came into existence every watch is timed on it as it speeds up production considerably. Although there are watches that are marked not regulated there is still time but a timing machine. Typically in the US a lot of watches were marked non-or not regulated because of import tariffs that would bump up the cost if the watch add features like the quantity of jewels precious metals if it's regulated or not. So to keep the movement costs down they would say not regulated even though it had been placed across the timing machine

then in the early days of electric watches watches of your quality in other words inexpensive might have interesting dials that would have words that look like electric but weren't to try to convince the customer that maybe this is an electric watch when it was not

Then the hairspring doesn't really look that bad yes it looks bad now but we've seen worse that would be a lot harder to fix this just looks like it's knocked out of alignment.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Yes: that's it exactly, right down to the break in the spring!!
    • I've bought brands like Citizen, Seiko, Titoni, Tissot, Roamer. Strange thing is many of them were using ST96 movements. I'm not sure if the ST96 is original to that model or whether it was a replacement movement.  All the watches with nice looking dials were obviously refurbished, after-market dials. And all of them had over-polished watchcases. Some of them had non-original hairsprings, rejewelled pallet forks, watch crystals that don't fit and glued in with a generous amount of glue. One of them was totally not working because the pallet jewel was loose to the point that it almost fell off. But the sellers were very nice. The seller of the non-working watch gave me a complete refund. Some of them gave partial refunds. I would say don't by luxury watches on the internet, regardless of the country the seller is from. Don't believe the "serviced by master watchmaker" statement. Have realistic expectations. ( Do expect the occasional complete junk.) Do expect to do a complete overhaul and major repairs. Otherwise, watches from Mumbai are great. For clocks.... I'm not so sure.
    • In 2020,I picked up an Orient Mako II online. It ran at +15 seconds per day and after 3 years of resets more than weekly, it was time to crack the seal and take a shot at regulating it. Not having a timegrapher, I used a spreadsheet to track the time, referenced the Canadian NRC website, wore the watch between adjustments, and used the back end of some tweezers to lightly tap the regulator daily until it ran to within one second per day.   Two months later, it’s still running to within 1 second per day when measured over a week or longer, while daily variations are up to 9 seconds per day. For my purposes, its overall stability is surprisingly good. Is this method of adjustment “better” than adjusting to 5 positions using a timegrapher, since during the adjustment period the watch is already in the environment in which it’ll be used? Rob in Winnipeg 
    • Nice file  Just got old pocket watch in and tools,  can I get it back together or should I give up.  we'll see  thanks for the info
    • @HectorLooi Yes, I would say that Mumbai has the highest liquidity in terms used watches. How was your experience with these used watches and what watch brands did you buy used? I have always found the vintage luxury watch segment in India a bit shady. Quite a few are genuine watches with genuine matching parts but just not from the same one.
×
×
  • Create New...