Jump to content

"The Watchmaker " a short documentary film.


Recommended Posts

18 minutes ago, RichardHarris123 said:

No finger cots, smoking inside and dubious electrics. What's not to like?  

👍that's our kind of working environment 😅. I would have loved to have picked the boy's brain.  Ages since i watched that video ,I think he mentioned his knowledge will go with him.

  • Like 1
Link to comment
Share on other sites

3 minutes ago, Neverenoughwatches said:

I bet he knew exactly where everything was and hadn't pinged a part in decades. His tweezers would have truly been an extension of his huge knarly hands.

I was thinking that he probably knows where everything in the entire shop is.

Then I was curious where the shop was and whether it still existed and the building exists of course he is no longer there the article explains when he died. That I was wondering if his apartment was above the shop?

http://westhampsteadlife.com/2014/01/15/a-moment-in-time-on-mill-lane/9921

image.thumb.png.e0740311e5027ddb29a7deb5aa17cefb.png

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

26 minutes ago, JohnR725 said:

I was thinking that he probably knows where everything in the entire shop is.

Then I was curious where the shop was and whether it still existed and the building exists of course he is no longer there the article explains when he died. That I was wondering if his apartment was above the shop?

http://westhampsteadlife.com/2014/01/15/a-moment-in-time-on-mill-lane/9921

image.thumb.png.e0740311e5027ddb29a7deb5aa17cefb.png

Good old Norm, he'll have forgotten more about watchmaking than I'll ever know. I wonder what it was like in his shop in the 30s when wristwatches were becoming ever popular taking over from pocket watches. I bet there wasn't a watch brand he hadn't handled, what a mentor to have for vintage repairing. 

  • Like 2
Link to comment
Share on other sites

There is a plaque at the site of his old shop. https://openplaques.org/plaques/9382 

When he lit up the pipe in the film, it reminded me of my old boss in the electronics service department where I worked in the 70s. He would light up his pipe after lunch each day and I can remember the nice smell and the good times there.

  • Like 4
Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hiya watch people,  any more ideas on what to do here yet ? How about just adding ourselves to waggy's list for now. You dont have to add your full name and an email that can be trashed takes minutes to set up. 
    • Certainly looks like a ring that needs unscrewing in that photo. It definitely looks like a thread above the castellated ring as well. Separate to the caseback ring thread. It even looks to be a smaller diameter. I would expect that. Once undone out of its thread, it should fall out of the case. Would it be possible to make a tool shaped like a letter H with one side of the H engaging the castellations in the ring and the other side of the H for you to be able to unscrew it using your hand? Making a tool with 6 'legs' to pick up all of the castellations would be a labour of love.
    • Can anyone advise how to remove the crystal from a Vertex DD case ?  I think I need to unscrew an internal retainer ?  It definitely isn't just pushing out.
    • Alright, the job is done. I first filed down the stubs flat. I then used a Proxxon hand drill first with a 0.5mm bit to score a point to work from, then a 1mm drill bit to properly drill out some lug holes. I just went slowly, checking the depth as I went. I drilled the inside of the lugs, leaving the outsides unblemished. I was worried that drilling at an angle might be a problem, but it turned out fine. Lug holes don't need to be very accurate, so it was actually easy to create holes to easily accommodate a spring bar. The result is a 'good enough' outcome that worked for me. Thanks for your help everyone, loving the hobby so far. I learn so much with each project.
    • Welcome to the forum. Yep not a cheap hobby by any means , Ali Express, the Chinese Amazon has some decent tools but should ask the members their thoughts before purchase.  A little reading to help you along. TZIllustratedGlossary.pdf
×
×
  • Create New...