Jump to content

Looking for an incabloc shock spring for a 1960s Omega Seamaster 30 Cal 286

DrJ
 Share

Recommended Posts

DrJ Member

DrJ

Posted
Posted

Hello, I have been restoring the above watch that has had a lot of seawater damage to the winding stem and eventually was able to remove it and currently cleaning it up. Rest of the movement looks good besides moderate moisture damaage to the dial. Current is is the one shock spring in broken and this part and in fact caliber is difficult to find online. Attached are some photos and would appreciate any leads or suggestions to track one down.  Thanks.DSC07497.thumb.JPG.00d51088a3aa8771e3940c96d8a60053.JPG

cw26.jpg

DSC07498.JPG

Link to comment
Share on other sites
DrJ Member

DrJ

Posted
  • Author
Posted
17 hours ago, mikepilk said:

If you look on Cousins, they don't have the springs, but list the number.

If you search for Omega 269 1344, you can find them on ebay

image.thumb.png.447ce6dd2d204c2588f768b3362f780b.png

 

Thanks very much for your suggestions and help.  Regards, Jeffrey.

15 hours ago, DBROWN said:

Hey,

I may have some shock springs on a donor movement 286 from the first project I worked on as complete noob.  I’ll check when I get home from work later.

Darren

Thanks very much I would appreciate that. Also I am now looking for a winding stem, winiding pinion and clutch for the watch as all are totally corroded and falling apart after years of exposure to sea water - rest of the movement fortunately otherwise looks good. Would be happy to purchase any spares you dont need. Regards,  Jeffrey

Thanks all for the suggestions. Regards. Jeffrey.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • tomh207
      Standard crystals to replace tension ring crystals

      By tomh207 · Posted

      As always in this game the answer is “it depends “ because the first one worked out ok doesn’t mean all will. A case could be made in a way that it would not really matter much, sounds like your first example. However a case could also be made so that only a tension armoured crystal could be used. Generally you replace like for like to maintain the integrity of the watch.   Tom
    • ColinC
      Standard crystals to replace tension ring crystals

      By ColinC · Posted

      When can you use a standard crystal to replace one that had a tension ring? The first time I popped a crystal with a tension ring out of a watch I found that I had a suitable sized standard crystal and decided to try that.  It fit nicely and it was hard to see that anything was missing from the watch.  I understand that it probably reduced the water resistance of the watch but since it was an old dress watch it wasn't going for a swim anyway! I have since tried the same thing on another watch and found that the tension ring seemed to have an additional role of holding the dial in place.  With the standard crystal in there the dial and movement falls forward. This means it rattles in the case and falls forward and the hands fowl on the crystal (when the dial is down). Is there a trick I am missing here or does this watch require a special crystal?  I am reluctant to buy an expensive armoured crystal only to find I have the same problem.  
    • Levine98
      Chinese clone demagnetizers

      By Levine98 · Posted

      So I wrapped the anvil it in bubble wrap and passed ot through the demag only. Still no go—the unit is simply too strong.  next experiment is to use a VARIAC to lower the voltage and see if that reduces the magnetic field. 
    • VWatchie
      Need some crystal replacement advice

      By VWatchie · Posted

      In this case, the underside of the crystal is flat so I assume I don't have to worry about clearance to the hands. However, perhaps I'm missing something. If so, please let me know. I guess no one has the patience to get into the details of my first post so here's a simplified version of my question: The case diameter for the glass gasket is 36.9mm. However, Cousins doesn't have a glass gasket with that diameter. The closest are 36.8mm and 37.0mm. Would any of those two options work, and if so which one? I have no problem ordering both and testing them, but If someone already knows it is pointless, there's no reason to order. No, I haven't. Is there someone you can recommend? Preferably in Europe. Thanks!
    • rjenkinsgb
      Dangerous substances when disassembling timex indigloo?

      By rjenkinsgb · Posted

      No. It's incredibly volatile and evaporates in seconds; there is no way it would last as long as it took to just install the part cleaned in it, in the movement.  
×
×
  • Create New...