Jump to content

Seiko 5m42-0e60/69 glass and gasket

Willem1961
 Share

Recommended Posts

Willem1961 Member

Willem1961

Posted
Posted

I aready introduced myself a while ago when I posted a topic about 3D prints for the seiko model mentioned in the topic title. I was lucky to find the last model that came out in the 90’s catalog so now I have all 3 off them. 

IMG_4647.jpeg

A problem I am facing is how come the rotating bezel can get stuck while replacing the gasket and mineral, does that mean the mineral is not pressed downwards enough. If the mineral is placed without gasket the bezel rotates. 

Link to comment
Share on other sites
  • 3 months later...
Raffolan New Member

Raffolan

Posted
Posted

Hello Willem,

what height is the crystal gasket you have used? I recently replaced one of these and the new Seiko gasket is only 1.2mm high so sits below the bezel; a higher one could jam between the crystal and bezel.

Brian

Link to comment
Share on other sites
  • 1 month later...
Willem1961 Member

Willem1961

Posted
  • Author
Posted

Hello guy’s it’s already a while a go since I’ve been on the forum. The problem was the glass it looked like it was a original glass but by measuring it wasn’t so bought a original glass and now the bezel rotates but thanks for the tips. 
 

IMG_5526.jpeg

Finally I can close the chapter collecting seiko’s arctura kinetic Jorg Hysek 1998 models. 
I was lucky enough to find all 5m42-0e60/69 different dial colors and all the 5m42-0e30/39 different dial colors. 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Yes i did eventually realise that the oil will act as a barrier, I'm sure the discussion will continue. Ive had two oleophobic coffees ( added coconut ) and in the meantime i have this just delivered to take my mind off epilame for the time being. My favourite type of dial, its a beautiful looking watch traditional English made and it runs,  the ticktock is phenomenal,  i can hear it across my living room .  You wont believe how much it was. Thats interesting about synthetic oils , i thought the same, going from a 2 year service to 5 years is a big drop in income for service folk.  I expect some did well when they embraced the use of synthetic,  probably drawing in more customers than those that didn't use the new fangled substances , i bet fairly short lived though. The more frequent service makes more sense to me, not for just the service but for the regular check up inspections that might pick up impending faults. As far as epilame goes, wouldn't it be great to be able to fumigate the complete movement in a sealed jar of heated stearic acid, 🤔 now theres a thought 😅.
    • Albyon
      AS2031-57E solar panel - mission: impossible

      By Albyon · Posted

      Imm going to close the discussion by attaching the photo of my super-titanium after several vicissitudes finally working. Purchased as not working I replaced the battery and for a stroke of luck I found its semi-new solar panel which, having verified its operation, seems to recharge the accumulator perfectly. I had taken this watch almost by bet, with 40 euros I brought it back to life. The initial half idea was to resell it to finance another purchase, but.. it's definitely a nice item. It would need to check the impermeability but it's a pleasure to see it on the wrist 😃
    • Albyon
      Insert the movement inside the case

      By Albyon · Posted

      In fact the secret is to go gently and find the way without forcing, and the movement enters without problems
    • Murks
      2813

      By Murks · Posted

      Yea a have given it a full service this movement is chinese 2813 whats the lift angle for this movement does anyone knows  and how  do a remove the default  of 52 degrees on my timegrapher?   Hi you said my lift angle is default how do a remove this from my timegrapher?
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      Sure! Some very accomplished repairers never use epilame! I have often wondered if it is worth the trouble. Not using epilame will shorten the service intervals though, but that could be better perhaps both for the owner and the repairer!? Speaking of oiling, I just read this: After WWII in the 1950s the first Synthetic Oils came on the market. Most watchmakers did not rush to use these oils since they were bad for business now that the watch serviced with Synthetic oil would not come back to him for service for another 5-7 years he would lose a lot of income. ~Ofrei.com   Anyway, I wouldn't be surprised if it would be more correct to think of epilame as a binder rather than a repellant. Until convinced otherwise that's how I will think of epilame.
×
×
  • Create New...