Jump to content

The Omega Spirate


Recommended Posts

Its not very often in horology a truly new concept arrives Omega seem to have achieved it.
 

The Omega Spirate is a new balance spring system that can be adjusted for stiffness to allow fine adiustments of the rate to within 0.1 seconds per day. This is one of the few truly new ideas in horology made possible by silicon manufacturing techniques.

The system was announced in January this year.

However, technical details were sparse, with Omega supplying only basic images of the spring and views of the watch into which it's installed, the new Speedmaster Super Racing. Recently Omega invited the H7 to a technical conference on the Spirate from which this exclusive report has been prepared.

 

The Spirate has at its core a flat balance spring with unusual features, depicted in Figure 1. The body of the spring proper terminates at a flexible flat blade rather than at a more usual stud. The whole arrangement is in turn fixed to a stud by means of the short arm pointing to the right.

The general principle is this: the overall 'stiffness' of this balance spring is a combination of the stiffness of the spiral part and the stiffness of the blade. This overall stiffness directly affects the oscillator's period, (the rate of the watch). By subtly altering the stiffness of that short blade, the watch rate can be adjusted extremely finely.

 

See Pics: 

IMG_9922.jpeg

IMG_9923.jpeg

Edited by clockboy
  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Never seen that but yes very practical Hector 
    • Welcome, Simeon! I'm into Soviet watches too (not the political system, and yes, I am able to make the distinction, unlike some). They offer amazing value for money. I like your "Big Zero" profile image. It's a true classic and I have one of those myself. I noticed that the hands aren't the original. Not that it matters a lot but here's an interesting article about the Big Zero if you haven't already seen it.
    • I was thinking will the gasket stretch at all to match the desired size.  Did i also deduce that the original gasket is thinner (0 .5mm ) than the cousins gasket ( 0.8mm )  could that just be an effect of you measuring the case for the gasket size  H  ?
    • if we look at and understand why steel becomes magnetised and unmagnetised then its possible to work out why some devices are better than others. Simpy it is a parallel alignment of atoms , electrons within a material caused by external magnetic fields. Different magnetic fields cause different alignments and non alignment of atoms. Fields by AC currents are changing atom direction approx 50 times per second ( 50hz ). As a material is drawn away from a demagging device the field is becoming progressively weaker while also changing the material's atom direction having the effect of returning their random directions ( demagnetising ) . To improve on this demagetising effect, try changing the material's orientation as it is drawn away.  Fields caused by DC currents have the most permanent magnetising effect as the currect is flowing one way only. A good demagger would produce random magnet fields and disorientation of the material's atoms.  
    • Welcome to the forum, enjoy.  
×
×
  • Create New...