Jump to content

G Boley lathe maintenance?

Bill241
 Share

Recommended Posts

Bill241 Member

Bill241

Posted
Posted

Morning, 

I’ve just acquired a vintage G Boley lathe from the family of a late watchmaker. It’s in lovely condition as he took great care of his tools but it hasn’t been used for at least ten years. The headstock is turning smoothly but with some resistance, and there’s a lot of congealed oil. 

I’ve added some H32 oil to the oiling points behind the removable caps which has helped but I need to do a thorough job and remove the old oil. 

I don’t have a manual but wonder how exactly the headstock comes apart? Any pointers would be much appreciated. 

IMG_5992.jpeg

Bill241 Member

Bill241

Posted
  • Author
Posted

Thank you for the link. I managed to remove the rear bearing but the spindle won’t dislodge. I took the grub screw out and couldn’t detect another one under it. I’ve managed to clean the bearings as far as possible and it’s running far more freely now. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mikepilk
      Omega 26.5T3 alternative hairsprings ?

      By mikepilk · Posted

      Cousins sell collets and fixing pins.  https://www.cousinsuk.com/category/hairspring-collets-pins-studs-boots
    • Nucejoe
      Looking to try servicing an old movement

      By Nucejoe · Posted

      Welcome to the WRT forum.   Both pieces are worth TLC, they don't make them like these anymore, so you are looking at a limited available quantity. I suggest working on them when you have acquired good dexterity and experience.  Chinese keep making same chunk= junk and  love to see you break them, so to sell you another one, the fact that  they don't sell spare parts supports the point of my arguement.   If you are buying now, why not buy two Swiss scraps of the SAME CALIBER in need of repair, such that a good running one can be made out of the two, plus,  you will have your own spare parts inventory, well sorta. Keep us posted when choosing scraps  and ask questions, no $  charge for advice.  No shortage of help and advice here, we'll work with you till your rebuild one ticks happy and accurate. Regs        
    • watchweasol
      Looking to try servicing an old movement

      By watchweasol · Posted

      Hello welcome to the forum.   I have added a couple of documents you may find worth reading TZIllustratedGlossary.pdf TM 9-1575.pdf
    • SteveF
      Omega 26.5T3 alternative hairsprings ?

      By SteveF · Posted

      Funny I should come across this particular thread because I have a hairspring that I’ve just knocked the collet off!! It was too loose on the balance wheel and I was trying to tighten it (of course I failed!).  So I’m looking for a new balance myself. The hairspring is in quite good shape but obviously doesn’t have a collet now, so I don’t know if you’ll be able to use it. I wouldn’t dream of trying to refit the collet myself because I know exactly what would happen!! If I wanted to refit the collet to the hairspring (assuming I can find the original as it’s on the floor somewhere!!) where would I find a taper pin small enough? As some of you may know, this whole thing is tiny!!
    • tcabot
      Looking to try servicing an old movement

      By tcabot · Posted

      Thank you. No value to me, and I guess not much value to anyone else either - just practice fodder as far as I see them. Ingersoll might make a nice watch to wear if I manage to service it. Benrus, I suspect, is too far gone in terms of case and dial - no cheap ways of getting them to decent looking condition? I wonder how these old movements compare to modern Chinese ones? Probably not favourably, even if there's nothing broken in them? Progress moves on? I've got an old Slava that I'm quite attached to, so I won't be learning on that one.
×
×
  • Create New...