Jump to content

Broken pusher. Omega Seamaster 176.007

swiss2k
 Share

Recommended Posts

swiss2k WRT Addict

swiss2k

Posted
Posted

Greetings everyone, 

 

Got this nice early 176.007 Omega.. and well one pusher is broken. 

At closer inspection, I found that the pushers are not identical. So I would assume someone tried to replace the pusher, but probably they didn't have the right part, so they used what they had. 

I did try to find the number/parts my self, and this is what I found, not one but two "086ST005" and "086ST0005" numbers. Not sure are those identical or different part. Or even if those are the once I need.

 

Now the question is, does anyone know the proper part number of the pusher? 

 

Many thanks!

IMG_4090.JPG

IMG_4089.JPG

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted

image.png.f9a7bd531a4db41f30317c0497e04b2b.png

long time ago this would've been so much simpler when I had access to Swatch group but the source that I had no longer has access so were stuck with cousins.

The old case numbers are interesting that's not actually a decimal point in the number. it's why normally if you what the cousins and search for the number it only really want a search for the first three numbers or the modified version like I have at the link below. Then there's a problem with omega case numbers that case number fits a whole bunch of different material cases as a guess based on the number of PDFs C go through the PDF since even figure out what you're looking for I found that on one that said ST so maybe that stainless steel.

https://www.cousinsuk.com/document/search?SearchString=Omega+176.0007

 

 

 

 

  • Thanks 1
Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
10 hours ago, swiss2k said:

find and replace only the tube?

did you notice on the image I sliced off the PDF that on the left-hand side there is a red symbol that probably is a on the website click this and get a parts breakdown. So conceivably there is a parts breakdown for all the components which means by theory you could get just what you need. Like if somebody probably on eBay needed just the button and didn't need the other part. Otherwise at least here I can see what you're getting it looks like the whole thing.

https://www.watchmaterial.com/omega-speedmaster-professional-mark-ii-145-014-push-button-stainless/

 

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Case Tube Tool - Quest for one that works

      By Neverenoughwatches · Posted

      Now thats a real man's tool press 👍. I have one just like it in my back garden for when just CANT fix a watch . Its not something i have had to do yet, @Waggybut wouldn't any type of press be able to do this ? What about an adapted chain link  extractor work or a micrometer with some sleeve pushers made to slot over the ends. @Waggy Found something that could work Scott, comes with different size pins and pushers. Only bit that would need making is a round former to support the inside of the case, a piece of stout timber, bit of oak or mdf might do it. What i like about this one is the pin is pushed in, its in a sliding sleeve so it doesn't turn while its being driven. This has 4 pin sizes and 3 stumps as well so it will come in for other applications, the pins could be adapted to take other accessories from jewelling tools. I've just ordered one myself for some play time. 
    • Mperss920
      Seiko 6309a diver crown replacement

      By Mperss920 · Posted

      So I purchased this one based on my case number being listed. (Unless my case number is incorrect. The last digits are faint)
    • HectorLooi
      Case Tube Tool - Quest for one that works

      By HectorLooi · Posted

      I have the same tool from AliExpress and get the same anxiety when when using it. But you have to admit it looks awesome on your tool shelf. Makes you look like a pro. 🤣 Looking at the photo of the Horotec tool, it looks equally flimsy. It probably comes from the same factory. I was thinking of using the pushers supplied with the tool and making a hand tool from a cranked jeweller's punch. I'll grind off the tip of the punch and drill a hole at the end to fit the pusher in. The cranked shank would be able to clear the watch case give a straight in-line axis to exert force to tap the pendant tube out. Should be robust enough to last several lifetimes. I wonder why nobody makes it. 🤔
    • VWatchie
      “Professionally” serviced, I promise. Zenith 146HP

      By VWatchie · Posted

      It reminds me of Ukrainian eBay sellers of Russian watches. More often than not the listings include the phrase "Serviced by Master Watchmaker". Of course, they never are, and it should be expected. It's the most corrupt country in Europe, definitely on par with Russia. Today our tiny country (Sweden) sent them another $1 232 255 518 with no accountability whatsoever for how the money will be used.
    • oldhippy
      Case Tube Tool - Quest for one that works

      By oldhippy · Posted

      Now that is taking it a bit far. You are going to need a bloody big workshop.  
×
×
  • Create New...