Jump to content

Odd Mainspring barrel problem

Winks
 Share

Recommended Posts

Winks New Member

Winks

Posted
Posted

Hi guys recently taking apart an old Services watch (5 jewels, shockproof) and had some trouble with the barrel. 

It has an attached wheel fixed to it, and while removing the mainspring spring and arbor I slipped the cog off the part it was attached to and now it is free floating. 

Obviously this is less than ideal, but is it salvageable and if so how do I get the cog back to where it was meant to be? 

(as per the third image, the large silver cog was originally attached flush to the top small cog)

Kind regards, 

Will

20230715_110909.jpg

20230715_110949.jpg

20230715_111014.jpg

20230715_111041.jpg

20230716_113721.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • tomh207
      Mechatronics Engineering v Mechanical Engineering

      By tomh207 · Posted

      It’s definitely a field that is not understood but is probably now the most important in manufacturing with the huge amount of automation and robotics being applied.   Tom
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Absolutely WW ,  i know you speak for us all when you say this. So Mark,  Old hippy, other moderators, the pros and the old timers, yes you especially WW. The ones that always help us out with advice, give up their time for us and never ask for anything in return. Cheers me dears.
    • tomh207
      Without Our Forum

      By tomh207 · Posted

      I have to add my thanks to @Mark for all he does here and his other site. It was Marks YouTube channel which got me into the track of the possibilities of repairing my own watches and servicing them. If I can help out at all as a moderator I volunteer wholeheartedly.   Tom
    • watchweasol
      Without Our Forum

      By watchweasol · Posted

      Well Gentlemen and Ladies I think we should thank @Mark for his posts putting our minds to rest and the explanation of running the site which is done very well. As a resource for watch repairs for new and old I would rate it second to none, the casual banter and dissemination of information  top notch, let us ll enjoy working on here and helping others. Any one can PM me as Iam sure others as well if it has to off the “record” and Marks blessing on that.   We appreciate that Mark is a busy man and totally appreciate what he does for us all.    So from me THANK YOU MARK. from an old timer.
    • watchweasol
      Dial Dots

      By watchweasol · Posted

      Hi it depends on the watch. The ones with the day date complications  dial dots are not really any good as you have difficulty getting the clearance between day date wheels a the dial.  Dial feet can be fitted no problem, there are several options, the cheapest is to mill out where the foot is and glue a new foot on. ( available fron Cousins UK ) mterialhouse . Or solder on a new foot, only problem with that is you need great care not to mark the dial. I use a DIY. Dial foot machine works no problem.
×
×
  • Create New...