Jump to content

MKS staking tool query

Bluescrew
 Share

Recommended Posts

Bluescrew Member

Bluescrew

Posted
Posted

I've recently seen an MKS staking tool for sale. It looks reasonably complete except that it's missing the small slot headed screw located in the side of the tool towards the top - please see the attached image of another member's tool.

I'd be interested to know what function this screw performs. Can the tool be used without it or is it needed to properly adjust the fit of the stake?MKSTOOL.thumb.JPG.3e0355b2f2cb2a982118f81102146942.JPG.

Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted
2 minutes ago, Bluescrew said:

I'd be interested to know what function this screw performs. Can the tool be used without it or is it needed to properly adjust the fit of the stake?

Thats a locking screw for the cam adjustment that the stake fits into. If the cam doesn't lock,  the stake can move off centre and not line up with the base holes. You should be able to source a locking screw.

  • Like 2
Link to comment
Share on other sites
watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi the round anvil has a little play but when tightened by the black screw at the Side it’s fixed  the punch guide that the set screw locks is eccentric to allow for alignment of the cantering punch, aligning the head and the anvil.  Set the anvil first then the punch guide.

 Alteratively the other way round the i Portman thing is the alignment.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      I'm guessing, but this commercial demag machine maybe produces random magnetic fields to re-randomise  the iron particles. So heres one for you, synthetic rubies are coloured predominantly with chromium oxide . But natural rubies and old synthetic watch rubies were also coloured with iron oxide in higher percentages than chromium oxide. Which gave them a degree of.................🤔
    • Jon
      Chinese clone demagnetizers

      By Jon · Posted

      I've never had a hairspring distort on me by passing the movement or just the balance in a plastic pot over this demagnetiser. Have you seen how fast a cleaning machine spins to spin-off fluid and that does no harm to a hairspring. I was a little concerned when I first used it, thinking it might be too strong, but I was wrong. It is strong, but it does no damage. I pass the part over the demagnetiser and keep going for about an arms length, so about a metre, to properly demag the part.
    • HectorLooi
      Seiko kinetic generator coil

      By HectorLooi · Posted

      I don't think you would be able to find spare parts. Your best bet would be to get a new movement from eBay. https://www.ebay.com/itm/256508500506?itmmeta=01HY3M863PSA61GK7B859QCWTE&hash=item3bb9191a1a:g:ubgAAOSwrJJgPP-s&itmprp=enc%3AAQAJAAAA4DxWhpiQiz2ZjKpm3PS%2FHPh4IafsSzMWEobc2q4qQWgPGMZ8kCR8y2PRsm7GE31FjeSDYSWcEyGlrpZEdQyyzOSgsgsaPjbP7dYmK8r49Nh%2BEtSqDDIZ8Tbp3vvX035fFXgcjc1GEH8l%2FOWJ9aTeWNGzeBgUwqyhJ3ZSXji50TQr6rd38Sqwaqsj2oc51UVKqqIKySKTfxVB7X09EXcJsmeYc5GCdVODNkb02q2RsxfSIzpgl9dFCmW1Ih%2BPg2j2NziSELg5AfaHl%2FPU2Zn9fNnoVN1Z1NUAREyh2BCubcWC|tkp%3ABk9SR_bhoPTwYw
    • Michael1962
      Vertex Dirty Dozen crystal

      By Michael1962 · Posted

      Here's a thought. Try unscrewing the bezel and the crystal. If you have one of those sticky balls for undoing casebacks, I would give that a try.
    • ManSkirtBrew
      Citizen Eco-Drive E870 movement issues

      By ManSkirtBrew · Posted

      Last week I noticed my Eco-drive's second hand was stopped at 12 o'clock. I left it in the sun for a few days and no change, so I figured it was time to replace the rechargeable battery. I've had this guy for at least 15 years. Replaced the battery and the seconds hand moved to about 5 o'clock and stopped there. I let it sit for a day in the sun, no change. I took the battery out and tested it, and it's at 1.4v. The old one was at 1.0v. I'd like to test if it's charging. I've been looking around for diagnostic info, but only been able to find the owner's manual. Anyone have a reference for it?
×
×
  • Create New...