Jump to content

9ct Gold Cushion Watch Circa 1949. Hand Made Etchings on Case Back and Front. Why?

SLim
 Share

Recommended Posts

SLim Member

SLim

Posted
Posted

Dear all,

I hope this finds you well.

I have the attached watch and was wondering what the scribes/etchings, were intended for.

Could they be to ensure both parts are a pair?

Could it be to show that the gold is not plated?

Wondered what the real reason is as I am only able to guess.

Any help on the subject would be gratefully received.

All the best, Steven.

Regarding the attached picture. This comprises of two images.

Image 1 - shows the upturned face, the etchings to which I refer are at the 12:00 position when viewing the image but at the 6:30 position once the face is attached to the body.

Image 2 - shows the watch with the face removed. The etchings are at the 6:30 position.

Many thanks for taking the time to look/respond to this query.

 

 

 

 

IMG_5658.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Pallet jewel

      By Neverenoughwatches · Posted

      Never seen that but yes very practical Hector 
    • VWatchie
      Simeon from Down Under

      By VWatchie · Posted

      Welcome, Simeon! I'm into Soviet watches too (not the political system, and yes, I am able to make the distinction, unlike some). They offer amazing value for money. I like your "Big Zero" profile image. It's a true classic and I have one of those myself. I noticed that the hands aren't the original. Not that it matters a lot but here's an interesting article about the Big Zero if you haven't already seen it.
    • Neverenoughwatches
      Need some crystal replacement advice

      By Neverenoughwatches · Posted

      I was thinking will the gasket stretch at all to match the desired size.  Did i also deduce that the original gasket is thinner (0 .5mm ) than the cousins gasket ( 0.8mm )  could that just be an effect of you measuring the case for the gasket size  H  ?
    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      if we look at and understand why steel becomes magnetised and unmagnetised then its possible to work out why some devices are better than others. Simpy it is a parallel alignment of atoms , electrons within a material caused by external magnetic fields. Different magnetic fields cause different alignments and non alignment of atoms. Fields by AC currents are changing atom direction approx 50 times per second ( 50hz ). As a material is drawn away from a demagging device the field is becoming progressively weaker while also changing the material's atom direction having the effect of returning their random directions ( demagnetising ) . To improve on this demagetising effect, try changing the material's orientation as it is drawn away.  Fields caused by DC currents have the most permanent magnetising effect as the currect is flowing one way only. A good demagger would produce random magnet fields and disorientation of the material's atoms.  
    • clockboy
      Simeon from Down Under

      By clockboy · Posted

      Welcome to the forum, enjoy.  
×
×
  • Create New...