Jump to content

Re-sizing a mainspring

Neverenoughwatches
 Share

Recommended Posts

Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted

Eyup watch peeps, i hope everone is well. I've just had a random idea maybe crazy ? ( hey I'm a bit fruit loop what can i say ). It dawned on me today while playing with a mainspring punch that a mainspring could theoretically be adjusted not only in length but also in height. If coiled and retained it could be ground or lapped to size ( yes I'm leaving out loads of details on the process so start thinking ). What are people thoughts ?  Barmy ? Or,  you may just have something there ? 

Link to comment
Share on other sites
nickelsilver Distinguished Member

nickelsilver

Posted
Posted

Done it numerous times. There's a limit how much you can take off, and the sides become sharp rather than rounded and that has to be addressed. You can't take a 2.00mm spring down to 1mm for example, there won't be a hole anymore. I've only done it when there was simply no other option, typically ultra thin pieces. You really have to glue (I use black Loctite super glue) it to a flat support, and have a bit of a method to keep it uniform. If you don't glue it down, inevitably the center coil becomes thinner than the rest. Of course you have to grind a bit, then unglue and reglue the other side and do the same. It's a hassle, but can save the day.

  • Like 1
Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
  • Author
Posted
17 minutes ago, nickelsilver said:

Done it numerous times. There's a limit how much you can take off, and the sides become sharp rather than rounded and that has to be addressed. You can't take a 2.00mm spring down to 1mm for example, there won't be a hole anymore. I've only done it when there was simply no other option, typically ultra thin pieces. You really have to glue (I use black Loctite super glue) it to a flat support, and have a bit of a method to keep it uniform. If you don't glue it down, inevitably the center coil becomes thinner than the rest. Of course you have to grind a bit, then unglue and reglue the other side and do the same. It's a hassle, but can save the day.

Thanks Nicklesilver, i just wondered if it was possible 🙆, the details i can now play around with. The main issue i figured would be getting rid of the burr.

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Rather silly if you ask me. If you do not do it right then the spring will not be the same strength from end to end, it could even cut or mark the coils or the inside of the barrel and the underside of the barrel lid. Why not just buy a spring if you cannot get the correct height get the next to it. There are plenty of places on the internet to search. Even members on here help out with stock.  

Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
  • Author
Posted
1 hour ago, oldhippy said:

Rather silly if you ask me. If you do not do it right then the spring will not be the same strength from end to end, it could even cut or mark the coils or the inside of the barrel and the underside of the barrel lid. Why not just buy a spring if you cannot get the correct height get the next to it. There are plenty of places on the internet to search. Even members on here help out with stock.  

Ahh more to think about, i didn't expect it to be easy. It was only an idea to see if it was possible, i also have thousands of springs .

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • B1N9S
      Vertex Dirty Dozen crystal

      By B1N9S · Posted

      Thanks for all the replies.  I'll investigate further.  I never noticed the lip and @Michael1962, I think I will have to form a tool to undo the ring and see what happens. I'll see if I can get some more pics.  
    • nevenbekriev
      Deciphering mainspring specifications…

      By nevenbekriev · Posted

      Hi John, The most important parameter of the spring is the thickness. The lenght is something that one would not consider as obligatory, as relatively big variations will not affect anything in significant way. The barrel size is related to the barrel and has nothing to do with the spring. Yes, the spring is designed to work in a barrel and the size of the barrel matters, but let this parameter be chosen by the movement manyfacturer, not by the sping manyfacturer who doesn't have idea in what kind of movement the spring will work. Sometimes the washer in which the spring arrives will be bigger than the barrel and there will be no way to just push the spring in the barrel and be happy. Well, if this is a problem for somebody, then probably He is a person with to many problems that will be verry hard to help to in any way. By the way, why You are changing the spring? Is the old one broken?
    • Waggy
      404 Club Reboot

      By Waggy · Posted

      Lets give it to the end of this month to get all the votes in, then we can call it?
    • Waggy
      Without Our Forum

      By Waggy · Posted

      OK, I have created a solution to the above, I have made a fake protonmail account, if you PM me I can send you the password, just click on the contact link and enter your information, this should be as secure as it gets:   Website:     Link Login: email as highlighted in above screenshot WRTArk    @   Proton.    me Password: ..........PM me and I'll let you know   Only intend to use the contacts function, not the email or anything else - we are all grown ups, please act responsibly.
    • eccentric59
      404 Club Reboot

      By eccentric59 · Posted

      I went with 8.90£ because 12th century Italian mathematicians are always excellent topics to bring up when trying to get your guests to go home. 
×
×
  • Create New...