Jump to content

Newbie


DiscoStu

Recommended Posts

Hi guys and gals, just registered and saying hello, I've been an avid reader on the forum and found it very helpful,  lots of people with tons of knowledge,  I only got to the watch repair scene recently after finding my old seiko from the eighties and fixing it up, since then it's gone crazy, bought loads of tools and watches and enjoying every minute,  wish I'd done it years ago before the dodgy eyes set in, luckily I haven't got the shakes so that's a bonus, I've stripped and rebuilt half a dozen autos already and very chuffed with the results,  not bad for 6 months in, look forward to future posting,  cheers 

  • Like 1
Link to comment
Share on other sites

Addictive it is. Great fun. No problem with my eyes. No eye-strain at all. I use a head magnifying head set with LED. Never look at the watches without it on. I use reading glasses 1.5 which I keep on. Then I use the double lenses, 2.5 and 3.5 for normal work, and the loupe for checking pivots and jewels. LED is a boon.

 https://www.ebay.co.uk/itm/404167874198?hash=item5e1a485696:g:z-YAAOSwv-5j7z1i&amdata=enc%3AAQAIAAAA8IlOhxI4B%2F26Yd0W8vnK2aD3GEdV%2BiCMWZPHKqmkctk%2Bt72pJFk54kEWB8pzOlQaElcpEK%2BilKp%2BvAufAL5hTNHm4xfLb2wlc%2BnD8IRPbkCZarYKMP7wt1y9X2ZTtdzX9JXIdnWdCQH9NOUPCpIEigCt9yQAbXMjU485159Pck8OZB0iZ9PaWKH97T%2Bf1NOZy%2FV9MWZly9KhT%2B9jxK9nBuKNhI%2BGb8hJkUJS0HUbanSVgUJVEoZtH0QvXhuW6N6qIhNBnc0lZXkqiFGzztMiCQEIBBo6qSOPbUxt6mBOFlUkvk007AxTrEOVEUx6xGyu2w%3D%3D|tkp%3ABk9SR9rDodTwYQ

Edited by rossjackson01
more information
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Yes: that's it exactly, right down to the break in the spring!!
    • I've bought brands like Citizen, Seiko, Titoni, Tissot, Roamer. Strange thing is many of them were using ST96 movements. I'm not sure if the ST96 is original to that model or whether it was a replacement movement.  All the watches with nice looking dials were obviously refurbished, after-market dials. And all of them had over-polished watchcases. Some of them had non-original hairsprings, rejewelled pallet forks, watch crystals that don't fit and glued in with a generous amount of glue. One of them was totally not working because the pallet jewel was loose to the point that it almost fell off. But the sellers were very nice. The seller of the non-working watch gave me a complete refund. Some of them gave partial refunds. I would say don't by luxury watches on the internet, regardless of the country the seller is from. Don't believe the "serviced by master watchmaker" statement. Have realistic expectations. ( Do expect the occasional complete junk.) Do expect to do a complete overhaul and major repairs. Otherwise, watches from Mumbai are great. For clocks.... I'm not so sure.
    • In 2020,I picked up an Orient Mako II online. It ran at +15 seconds per day and after 3 years of resets more than weekly, it was time to crack the seal and take a shot at regulating it. Not having a timegrapher, I used a spreadsheet to track the time, referenced the Canadian NRC website, wore the watch between adjustments, and used the back end of some tweezers to lightly tap the regulator daily until it ran to within one second per day.   Two months later, it’s still running to within 1 second per day when measured over a week or longer, while daily variations are up to 9 seconds per day. For my purposes, its overall stability is surprisingly good. Is this method of adjustment “better” than adjusting to 5 positions using a timegrapher, since during the adjustment period the watch is already in the environment in which it’ll be used? Rob in Winnipeg 
    • Nice file  Just got old pocket watch in and tools,  can I get it back together or should I give up.  we'll see  thanks for the info
    • @HectorLooi Yes, I would say that Mumbai has the highest liquidity in terms used watches. How was your experience with these used watches and what watch brands did you buy used? I have always found the vintage luxury watch segment in India a bit shady. Quite a few are genuine watches with genuine matching parts but just not from the same one.
×
×
  • Create New...