Jump to content

Seiko 7009A movement in a NH35 case?

Waggy
 Share

Recommended Posts

Waggy Distinguished Member

Waggy

Posted
Posted

Good day,

I have a Seiko 7009A watch with a 'beyond repair' case, lug is broken and deep gouges out of the case front and back. However, the movement and dial/hands seem to be in good shape. I was thinking of getting an aftermarket NH35 case to resurrect the watch rather than putting a perfectly working movement into the donor pile. Before I open my wallet, does anyone have any experience in putting a 7009A in a NH35 case, they appear to be visually comparable, but just wondered if anyone had any real-world experience.or advice?

Link to comment
Share on other sites
  • 11 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Pivot Gauge

      By RichardHarris123 · Posted

      I've remembered something I had forgotten.  I've come across Dennison before but forgot all about it as I'm never going to use the units.  Maybe we should start a  thread on obscure units of measurement. 
    • Waggy
      Pivot Gauge

      By Waggy · Posted

      Learned a new thing today! 🤓 Looked this up and found this informative document: Watkins-MainspringGauges.pdf
    • Neverenoughwatches
      Cleaning solution clarification

      By Neverenoughwatches · Posted

      Correct one dip is expensive when the chemical is purchased as " one dip " which is why it is mostly reserved for these two small parts as far as information tells us it is mostly tetrachloroethylene. I use it bought as perchloroethyl used in dry cleaning processes, i cant say I'm overimpressed with it though it appears to me to be shellac safe. What may be a better solution for hairsprings is a high lab grade of pure benzine.  IPA is mostly used as a rinse and water displacer and yes it does have the potential to dissolve shellac, personally i would not buy anything that has significant water dilution so 99.9% IPA is the way to go. And lastly the part you are cleaning dictates your choice of cleaning brush, delicate parts like a hairspring requires the finest artist's brush you can find. Plates and bridges can take a little more scrubbing, but always check to make sure the surface is being unharmed. And dont forget a stick of tip benzine soaked correctly shaped pegwood is your mate set up for cleaning dirty jewels and removing stubborn dried up lubrication. 
    • RichardHarris123
      Hello from Indiana!

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. 
    • Neverenoughwatches
      Pivot Gauge

      By Neverenoughwatches · Posted

      Den / Dennison is a unit measurement of size this is actually a mainspring gauge . I haven't heard of a pivot been measured in Dennison before.  Though the small thickness gauge is  usually supplied with a Jacot tool and is more accurately known as a pivot destroyer.
×
×
  • Create New...