Jump to content

From the Palmetto State, y'all!

Mattutron

By Mattutron
in Introduce Yourself Here

 Share

Recommended Posts

Mattutron New Member

Mattutron

Posted
Posted

Howdy, y'all, from sunny South Carolina!

I'm just starting my horological adventure, inspired by a 50-year-old Accutron (218D) purchased for my 50th birthday last April. There was a sentimental consideration when selecting a family present for a my semi-centennial celebration: What's more appropriate than a historically significant timepiece that has been ticking as long as my own ticker?  (OK, before my fellow Accutron brothers and sisters speak up, it hums not ticks.) 

Before that, my interest in watches was strictly practical and job-specific. As an outdoorsman and Scout leader, my "collection" consisted of G-Shocks, Suuntos and Garmins, with a smattering of analogs from Fossil (yes, I know). Since that fateful birthday, my interest in "real" timepieces has exploded. Who knew one could spend hours window-shopping online for watches on eBay, or watching repair videos on YouTube?!

I purchased a second, non-functioning Accutron (N3-218D) with the goal of learning how to repair it. Then came from Amazon shipments of tweezers, loupes, movement holders and all of the accoutrements necessary for the task, as well as the skeptical looks from my lovely wife... I found a source for the appropriate coil that seems to be the most common culprit and stripped the movement down to individual parts. And then ... Without a 20+ power microscope, I'm stuck; thus, the wait continues as I source an affordable microscope that won't draw more severe looks from the love of my life.

I've started a small, thought-out and affordable collection of watches, including a new Seiko 5 sport (4R36) and a Tissot Chemin Des Tourelles (Powermatic 80) dress watch. And just this week, I received two vintage (can't believe I'm saying vintage) 80s- to 90s-era Seiko 5s from eBay: a functioning 7009-876A and a non-functioning 7S26C (from which the balance cock screw is currently hiding in the berber carpet of my home office). Along the way, I dragged my teenaged son into this new world. One of his 15th birthday presents was a simple Orient Bambino, and on his own volition and using his neighborhood lawn-mowing earnings, he purchased a beautiful Seiko Presage dress watch for church. 

I suspect I will be tapping into the vast experience of this forum often as I semi-ignorantly dive head first into this new adventure, and in advance, I thank you for your patience and guidance!

-Mattutron (North Augusta, SC)

 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • AndyGSi
      Looking to try servicing an old movement

      By AndyGSi · Posted

      Welcome to the forum. You're best starting with something that you know runs well and keeps good time. That way when you've stripped and service it, any problems are due to something you've done.
    • Kalanag
      Looking to try servicing an old movement

      By Kalanag · Posted

      Welcome to the WRT-Forum! Sorry to say it, but you’re very likely to break or lose something when servicing a wristwatch for the first time — I’ve been there! So, if these watches have any value to you, don’t attempt to service them as a beginner.
    • dnhb
      Loose roller table

      By dnhb · Posted

      In writing "shimming the staff" I was alluding to the idea trailed in the above referenced thread of inserting a hair along the staff which, as the discussion there covered,  could result in some eccentricity. By making a (more or less) complete cylinder I was hoping to avoid that problem. Don't tell anyone, but needing a very ductile metal to do this by manipulation at such a small scale, I used a piece of an empty Tomato pureé tube! It occurred to me that the material's ductility(?) would also put less stress on the RT in forming a sufficiently tight seal. Anyway, that's how I avoided the temptation to use glue. No doubt your punctuational response to this confession will be "!!!" !
    • tcabot
      Looking to try servicing an old movement

      By tcabot · Posted

      Hi All. I would appreciate some advice for a complete newbie on getting into watch servicing - nothing serious,  just as a fun project. I've got a thing for hand-wound watches and would like to bring an old watch (or two) back to life, so looking to learn to do a strip-clean-oil-assemble cycle.   I've toyed with this idea in the past (years ago) and picked up a couple candidates to learn on, but never found the time for them.  One is an old Ingersoll, swiss-made 17 jewels. It seems to wind and tick. Casing, dial, glass are in great shape, so looks like a good candidate to me for the first service. The other is a Benrus DR23. It winds and makes a few reluctant ticks, but then seems to stop. Casing looks like a complete gonner, and the dial is in pretty poor shape too. If the movement is not broken and just needs a service, I wonder if there's any possibility of getting a cheapo Chinese casing & dial to fit this movement in, or is it extremely unlikely to be the right size?   For a start, I want to strip & assemble a movement, perhaps a dozen times to build up the basic parts handling skills. I see that online advice is to buy a Chinese-made ST36 for this purpose. Can I just go at the Benrus or Ingersoll instead, or does it make more sense to get a cheap ST for this? Thank you.    
    • rsouissi
      Navitimer 806 with a bezel that plays a little bit

      By rsouissi · Posted

      Hi,  I have this vintage Navitimer 806 with a bezel that plays a little bit as shown in this video: https://imgur.com/a/2NjdiF0 How would you fix this? I don't see where a gasket would fit for instance. Also, it seems this issue happens sometimes with older Navitimers.  Thanks
×
×
  • Create New...