Removing movement by the frontside

[BlueHarp]

Hello,

I got a Lip Automatic watch with a INT 7525/2 movement (Durowe?), and I can't remove the movement drom the case. There are two tiny screws that make me think that the removal must be done by the front side, an additional guess being the large diametre of the dial. But there is no space to un screw the bazel or to put a blade....???
Here are a few pictures :
https://1drv.ms/u/s!AmSEWqSryKqAjBjszENCaQis76t-?e=nQ17Qg

https://1drv.ms/u/s!AmSEWqSryKqAjBnLV0qoA2ELgjqz?e=8Nq1tM

[LittleWatchShop]

I would guess that it is a front loader.  You need to remove the crystal, if so.  You need to replace the crystal anyway for it is in bad shape.  To do that you will need a crystal lift tool.

[BlueHarp]

Ok, thank you!

[BlueHarp]

I was able to gain access to the movement after removing the crystal (which was in very bad condition). Now I have to order a tool to put a new crystal (I have just found one).

Thanks again