Eta2892-A2 Movement With The Dubois Depraz Module

[Legarm]

Right...... about to start on this, after watch Marks vid twice....... and he says to put the chrono in the start position. The one I am servicing, the chrono is not working, the time is working OK. Therefore I cannot put it in the start position. So do I go in blind and see what's going on in the module? If so, will I be able to reset the hammers on re-assembly.

Any remedies greatly appreciated.....

Keith

[Mark]

Keith the reason to put it in start mode is to release the tension on one of the springs. You should be fine.

Do you need the service sheet?

Sent from my iPhone using Tapatalk

[Legarm]

Keith the reason to put it in start mode is to release the tension on one of the springs. You should be fine.

Do you need the service sheet?

Sent from my iPhone using Tapatalk

 

I thought as much, but thought best to check.

 

Service sheet would be lovely please. I shall message with Email.... :)

[Mark]

No problem. I will send it when I get on my computer. Watching the new mad max at the moment

Sent from my iPhone using Tapatalk

[Legarm]

Thank you................... :)

[bobm12]

I own the 3 previous mad max! Can't wait to watch the new one! :)

[matabog]

Did someone say Dubois Depraz module service sheet?

 

Thank you,

Bogdan