Jump to content

Seiko and Miyota parts


Recommended Posts

Hello and welcome to the forum,    In the Uk Cousins UK watch parts, A.G Thomas. Gleave and co  H.S.Walsh  all material houses   In the YSA  Jules Borel.  Esslingers   Time savers to name but a few.

BTW It is considered polite to give an introduction when joining the forum.    cheers. 

  • Like 1
Link to comment
Share on other sites

On 5/2/2021 at 10:31 AM, MattS said:

Hi, can someone please guide where I can buy mainsprings for Seiko 6R15C/D and Miyota 8203. Thanks.

Seiko does not sell the mainspring alone, only the barrel complete. On the 6R15 the mainspring  made of a special steel (SPRON) and even if the barrel complete is  found, price may be quite high. On the other hand a generic mainspring likely will not provide the specifications of 50hrs power reserve.

That being said I don't know how you have diagnosed that something is wrong with the mainspring, which is not common at all. 

  • Like 1
Link to comment
Share on other sites

Thanks for the replies. Actually there is nothing wrong with the mainspring that I know of, but since I don't have a mainspring winder I thought that it's not ideal to wind the mainspring by hand and would be better of to buy a new one.

Link to comment
Share on other sites

1 hour ago, MattS said:

Actually there is nothing wrong with the mainspring that I know of, but since I don't have a mainspring winder I thought that it's not ideal to wind the mainspring by hand and would be better of to buy a new one.

Best is to not open these Seiko barrels at all, also because there is no known commercially available winder that fits perfectly. If you have pulled the mainspring be careful to not bend it and it may go back and work just fine.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I think we are about there, if there were still lots out there then the cost of a watch from 5 years ago would be around the same as it is now (allowing for inflation). Given that the price has gone up several times over we can only assume that supply cannot keep up with demand so we must be at or past peak supply, especially if the trend continues. I see even places like Australia, Ukraine and even South America are selling watches on eBay, picking over their stocks, mixed in with fakes and Frankenwatches etc.
    • I understand the demand bit, the generation below me 30ish are too technology engrossed to own a mechanical watch and they just dont like old stuff. I also consider myself at the getting on age of 57 to be a rare find of someone that likes old stuff, i did buy an almost 100 year old book yesterday titled " The New Modern Home " printed 1929.  Cost me a quid. What i was trying to work out is if we have reached a volume peak of watches being discovered hidden in the back of drawers.  Those watches that were hung onto until they entered the hands of the non sentimental generation. 
    • Even for myself who only started getting into watch repair/servicing during COVID I have seen a huge jump in watch prices - we have a 404 channel on this forum. When I started you could relatively easily find a watch on eBay to restore and put onto the channel, however this is now almost impossible and the only feasible solution is to buy a job lot with an average price <4.04. Even watches sold for parts/spares are 3 or four times the price of only a few years ago. Why - Either Demand must have increased in order to push up the price, or supply is reduced. I think it is a little of both, I think that most watches in the UK/US may have been picked over, which agrees with most of what @Neverenoughwatches says so supply of all kinds of vintage watches, including tat is dwindling. As a double whammy I think that more people are wanting watches, either to work on, or as a way to differentiate themselves from the Apple Watch and FitBit crowd. The upshot is that half decent watches that require restoration are now $500 instead of $100 and cheaper watches (Seiko 5 etc) are now $50 instead of $10, and even Mumbai Specials and garbage are now pushing $50 each. When - how long will this last, I think that most of the people who are returning to mechanical watches are those that have previously experienced life without them and want to return to something with a bit of personality that doesn't buzz every 10 seconds on your wrist and tell you how many steps you have done today. i.e. the 30-40+ generation. My son who is 17 has several mechanical watches but only wears one on a special occasion and is obviously only aware of them at all in part due to my hobby. I asked him the other day how many of his friends wear a watch and he told me that some use a smart watch but most just use their phones. So as I see it, demand will start to fall once the sub-thirty crowd start becoming the majority and/or the older amongst us stop buying watches and switch our attention to mobility scooters and trying to remember our bank password. Price - I think this is here to stay, even if demand does start to drop as the older generation becomes to decrepit and stops buying and the younger generation isn't interested in buying, supply will become progressively less as time goes on as more vintage watches become lost or broken beyond repair. I think the prices will plateau at some point as an equilibrium is reached as reduced demand is balanced with reduced supply, i.e. less and less people buying less and less watches. Sorry for the long ramble!
    • Hi. Use a PVA based glue, gorilla glue it dries transparent then do as advised by Old Hippy, smoothe down using very fine  0000 wire wool and either French polish or beeswax for a finish.
    • Hello and welcome to the forum.    Enjoy
×
×
  • Create New...